RP-2412S Power Supplies - Board Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are used as power regulating devices to convert one DC voltage from one source to another. A DC to DC converter can also be used to step-up or step-down voltages, to isolate, filter, or regulate voltages, or to create a small regulated output voltage from an unregulated input voltage. RP-2412S is a high efficient, high performance, DC to DC converter with a wide input range of 9V ~ 60V and output range of 0.6V ~ 58V, typically used in automotive, industrial, computer and communication applications.

The RP-2412S wide input range makes it applicable to different applications of communication, automotive, computer and industrial control, specifically in voltage conversion, isolation, and power conditioning. The input, from 9V to 60V, is regulated to the output voltage of 0.6-58V with a delicate step-down configuration. The RP-2412S is also suitable for most low power applications that requires up to 300W of continuous power.

The working principle of the RP-2412S is based on the switching converter, which works in a buck-boost configuration. The input voltage is regulated to the output voltage by pushing the power transistor to open and close. In open status, the voltage is transferred from the input to the output. In close status, at the same time, the voltage is stored on the inductor, capacitor, and the diode for the next open step. Thus, the RP-2412S can closely match the input voltage to the output voltage.

The RP-2412S utilizes a synchronous regulator, using a feedback loop control system to monitor input and output voltage. The control loop compares the output voltage with a reference voltage and dynamically adjusts the output by increasing or decreasing the duty cycle. The RP-2412S is also equipped with over-voltage, over-current, under-voltage and over-temperature protection.

RP-2412S is equipped with a precise current-sharing feature that allows the converter to deliver up to a total of 696W from parallel configurators. The can also efficiently share the load current from each device when connected in the parallel configuration.

The high quality components of the converter ensure its expertise in isolating voltage noise, providing clean power, and steady output voltage. The RP-2412S is protected against short circuits, and current, voltage, and temperature overloads. Moreover, the current limit reduces mechanical stress on connected components and reduces heat emission. Thus, its wide input range, high efficiency, and reliable protection systems make the RP-2412S a superb choice for low power applications that demands high performance and reliability.

The specific data is subject to PDF, and the above content is for reference