RP20-1212DF/N-HC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electrical devices that transfer electrical energy from one DC circuit to another. The RP20-1212DF/N-HC is a type of DC-DC converter designed to regulate the current flow between DC input and DC output by varying the duty cycle of an oscillator. It has a wide range of applications, from power supplies for electronic devices to automotive and industrial applications.

A converter of this model is built with an internal oscillator that operates at a frequency of 1 kHz. The duty cycle of the oscillator is adjusted by the pulse width modulated (PWM) control circuit, which receives a correspodning input signal from an external control source. This input signal is used to adjust the duty cycle of the oscillator, and thus the conversion ratio between the input and the output voltage.

The duty cycle of the oscillator is the primary factor that regulates the current flow between the inputs and outputs. As the duty cycle is increased, more power is transferred from the input side to the output side, with correspondingly less power being transferred back. By adjusting the duty cycle of the oscillator, the converter can be configured to step up, step down, or isolate the two sides from each other.

In applications where the required output voltage is higher than the input voltage, the RP20-1212DF/N-HC can be used as a step-up (or boost) converter. In this configuration, the PWM control circuit adjusts the duty cycle such that more power is transferred from the input side to the output side, resulting in an increase in the output voltage. Conversely, when the required output voltage is lower than the input voltage, the converter can be used as a step-down (or buck) converter, with the PWM control circuit increasing the duty cycle to reduce the output voltage.

In some applications, it may be necessary to totally isolate the two DC circuits from each other. The RP20-1212DF/N-HC can be used as an isolation converter, which means that no current will flow between the input and output sides. This is accomplished by adjusting the duty cycle such that no power is transferred between the two sides, resulting in no current flow.

The RP20-1212DF/N-HC is a versatile and reliable DC-DC converter suitable for a wide range of applications. Its ability to step-up, step-down, or isolate DC input and output signals, coupled with its small size and low power consumption, makes it an attractive option for power supplies in a variety of applications, from consumer electronics to automotive and industrial applications.

The specific data is subject to PDF, and the above content is for reference