RPS1C181MCN1GS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum-Polymer Capacitors, also known as Solid Electrolytic Capacitors, are electrolytic capacitors distinguished by an anode composed of an aluminum cylinder, usually containing a wet electrolyte embedded within a solid polymer matrix. Aluminum-Polymer capacitors are a popular component for high-performance applications due to their high capacitance and low ESR.

The RPS1C181MCN1GS belongs to this category of capacitors. It is a typical Surface Mount Aluminum-Polymer Capacitor with a capacitance of 0.181μF and a working voltage of 6.3VDC. The size (otherwise known as footprint) of the capacitor is 0603, and its size is 7.3 mm x 4.3 mm x 2.5 mm. It is a Low ESR (Equivalent Series Resistance) capacitor, and its equivalent ESR is 12mΩ at 1kHz.

An Aluminum-Polymer Capacitor has a construction relatively similar to a traditional electrolytic capacitor. It consists of an aluminum cylinder anode, a dielectric material, and a tin coated brass cylinder cathode. The difference is that the aluminum cylinder is filled with a solid electrolyte instead of wet electrolyte. The solid electrolyte is also sometimes known as an ion conductor, as it allows ions to move through the solid material.

The working principle of the Aluminum-Polymer Capacitor (and the RPS1C181MCN1GS specifically) is relatively simple. It behaves as a standard capacitor with its two terminals, the anode and cathode. When power is connected to the two terminals, electrons flow from the anode to the cathode and create a capacitor effect. The solid polymer electrolytic also prevents ions from migrating through the capacitor, allowing it to replicate the same behavior as a typical electrolytic capacitor.

The RPS1C181MCN1GS is primarily used in general purpose circuit applications, due to its relatively low working voltage. It is suitable for applications where a low ESR capacitor is needed in order to reduce electrical noise. It can also be used in high-speed circuits, due to its small footprint size. It is also used for noise suppression for high frequency signals, as the low ESR reduces the ripple voltage which can cause noise in high speed circuits.

The RPS1C181MCN1GS is a useful component due to its small size and low ESR characteristics. It is suitable for a wide range of high-performance circuit applications, and is an increasingly popular choice due to its ability to reduce electrical noise. Aluminum-Polymer capacitors such as the RPS1C181MCN1GS provide an important alternative to traditional electrolytic capacitors, and they are now an essential component in many electrical circuits.

The specific data is subject to PDF, and the above content is for reference