Current - Output (Max):	200mA, 200mA
Control Features:	Enable, Active Low
Size / Dimension:	0.86" L x 0.36" W x 0.44" H (21.8mm x 9.2mm x 11.1mm)
Package / Case:	8-SIP Module, 7 Leads
Mounting Type:	Through Hole
Efficiency:	78%
Operating Temperature:	-40°C ~ 85°C
Features:	Remote On/Off, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	1kV
Power (Watts):	2W
Series:	ECONOLINE RS
Voltage - Output 3:	--
Voltage - Output 2:	-5V
Voltage - Output 1:	5V
Voltage - Input (Max):	72V
Voltage - Input (Min):	36V
Number of Outputs:	2
Type:	Isolated Module
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC DC Converters are electronic devices that convert direct current (DC) from one voltage level to another. This conversion process, known as buck or boost, allows voltage levels to be tailored for a wide range of applications. One of the most common forms of DC converters is the RS-4805D, a DC-DC converter specifically designed for buck and boost applications.The RS-4805D is a switching type DC power converter, commonly referred to as a buck-boost converter. This converter has two separate power stages, each of which is capable of buck or boost operation. The buck-boost converter is capable of providing power to a load ranging from 2.7 to 52V DC. It has a maximum output current of 2A and a power efficiency of up to 96%.The RS-4805D is a monolithic integrated circuit (IC) composed of two power converter stages. The first stage is an open-collector type pulse width modulator (PWM) IC, which controls the amount of time the first power device is active. The second stage is a PWM-based buck-boost converter, which is capable of feeding the load with regulated voltage at levels ranging from 2.7 to 52V. The two stages operate independently, allowing for a wide range of input voltages and load currents.The RS-4805D is a versatile component that can be used in a variety of power conversion applications. It can be used to power DC motors, providing a regulated DC source for switching solenoids, controlling linear actuators, and providing a voltage source for intelligent controllers. It can also be used to power other DC devices such as microprocessors, remote sensors, and robotics.The RS-4805D has a wide input voltage range, making it suitable for applications that require conversion of higher voltages. Its wide output voltage range makes it an ideal choice for powering loads such as microprocessors and microcontrollers, which require relatively low voltages.The RS-4805D can be used in a variety of ways to control the output voltage. The most common method of controlling the output voltage is to adjust the bucking or boosting ratio of the second power stage. The RS-4805D can also be used in a variable frequency mode, where the PWM frequency is adjusted to vary the output voltage.The RS-4805D can also be used in a variety of applications ranging from automotive to telecommunications. Its flexibility and high efficiency make it an attractive option for a wide variety of power conversion needs.To use the RS-4805D, a basic design strategy is needed to accommodate the particular requirements of the application. Once the design is complete and the parameters of the application are established, the power converter can be connected to the load, and its operation can be regulated with the PWM frequency control. The output voltage can then be fine tuned with external components, such as resistors and capacitors.In conclusion, the RS-4805D is a versatile and efficient DC-DC converter suitable for use in a wide range of applications. With its wide range of input and output voltages and its ability to operate in either buck or boost mode, the RS-4805D is an ideal choice for powering a variety of loads.

The specific data is subject to PDF, and the above content is for reference