RS01039K00FE73 Resistors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-Hole Resistors are one of the most common components found in electronic circuits. The RS01039K00FE73 is a such type of resistor that is used for a variety of applications in the electrical and electronics market.A through-hole resistor is a small component with two small metal terminals in the holes that are directly attached to a metal track on the printed circuit board (PCB). It is used to control the flow of electric current, or resistance, in an electrical circuit. A variety of different sizes of through-hole resistors are available, with resistance values ranging from 0.1 ohms to 1 megaohm.The RS01039K00FE73 is a standard through-hole resistor with a size of 0.15 mm × 1.8 mm, and a resistance of 10k (10,000 ohms). This resistor has a tolerance of 5%, meaning that the actual resistance of the component may be up to 5% higher or lower than the stated value.The RS01039K00FE73 is a general-purpose resistor that is used for a wide variety of applications in the electronics and electrical market. It is most commonly used in low-voltage applications such as signal processing and audio electronics. The RS01039K00FE73 is also used in digital circuits, such as for timers and counters. In addition, this resistor is frequently used in power supplies and regulators, where it helps to control the amount of current flowing through the circuit.The resistance value of the RS01039K00FE73 is determined by the length of the resistive material track, which is made from a metal alloy. This alloy is usually composed of Nickel, Manganese, Cobalt, Silica, and/or Aluminum. To create the desired resistance value, the resistive material track is printed onto the PCB in a special pattern, allowing current to flow only through the specific resistive track and not through other tracks on the board.The resistance of the RS01039K00FE73 is constant and not affected by temperature, age or time. This is because the resistor is a non-active electronic component, meaning it does not need energy to maintain its functions and will maintain its same resistance regardless of the environment.The RS01039K00FE73 is a durable component and can withstand a wide range of temperatures and environmental conditions. However, the resistive material track can become damaged if the resistor is exposed to high voltage or current spikes, or if the temperature of the component becomes too high. Overall, the RS01039K00FE73 is a general purpose through-hole resistor with a variety of uses in the electronics and electrical market. It is available in sizes from as small as 0.15 mm ×1.8 mm, and resistance values ranging from 0.1 ohms to 1 megaohm. The RS01039K00FE73 provides reliable performance and resistance in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference