RSF-25JR-26-360R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are resistors of the type that are attached to circuit boards through holes made in the board. The RSF-25JR-26-360R is one such component, and it has many applications and a wide range of working principles.

The RSF-25JR-26-360R is most commonly used as a voltage divider, in which it is used to control voltage within a circuit. In this application, the resistor is placed in parallel with a voltage source, and the current will divide between the resistor and the source, resulting in a lower voltage at the end of the resistor. This allows for precise control over the circuit’s voltage. For example, if the resistor is set to 10 Ohms, then the voltage at the end of the resistor will be 10/2 = 5V. This is useful for controlling the power that is used by certain circuit components.

The RSF-25JR-26-360R can also be used as a current limiter. In this application, the resistor is placed in series with a powered circuit element. The current will not be able to flow through the element past the resistance, resulting in a lower maximum current. This is useful for protecting certain parts of a circuit from being overloaded or from drawing too much power. For example, if the resistor is set to 10 Ohms, then the maximum current that can flow past it would be 10 A.

The RSF-25JR-26-360R is also used as a noise filter. In this application, the resistor is placed in parallel with a signal path in order to reduce high frequency noise that could be present in the signal. The resistor works by absorbing the high frequency noise, while still allowing the lower frequency signal to pass through. This is useful for preventing noise from interfering with the signal.

The RSF-25JR-26-360R also has other uses, such as voltage stabilizers, transient voltage suppressors, precision resistors, and temperature sensors. Some of these applications require sensors in order to accurately measure the current or voltage before or after the resistor.

The technology behind the RSF-25JR-26-360R is based on a burning resistor. This technology is based on the discovery that when a thin foil is heated to very high temperatures, the inner layers of the foil will slowly burn away. This burning resistor works in a similar fashion, with a thin film or sheet of metal being heated to extremely high temperatures, causing the inner layers of the metal to gradually burn away. The result is that the resistance of the resistor will gradually decrease until it has reached a low enough value for the circuit in which it is being used.

The RSF-25JR-26-360R is a versatile and useful component, and it often used in a wide range of applications. It has a low resistance value and is capable of handling currents up to 10 Amps. It is also highly reliable and durable, making it a great choice for use in long-term applications. The burning resistor technology behind the RSF-25JR-26-360R is also quite efficient and reliable, making it an ideal choice for circuit components that need to be able to handle a high degree of precision.

The specific data is subject to PDF, and the above content is for reference