| Allicdata Part #: | RSF-50JR-52-3K6-ND |
| Manufacturer Part#: |
RSF-50JR-52-3K6 |
| Price: | $ 0.01 |
| Product Category: | Resistors |
| Manufacturer: | Yageo |
| Short Description: | RES METAL OXIDE 1/2W 5% AXIAL |
| More Detail: | 3.6 kOhms ±5% 0.5W, 1/2W Through Hole Resistor Axi... |
| DataSheet: |  RSF-50JR-52-3K6 Datasheet/PDF |
| Quantity: | 1000 |
| 5000 +: | $ 0.00911 |
| Series: | RSF |
| Packaging: | Tape & Reel (TR) |
| Part Status: | Active |
| Resistance: | 3.6 kOhms |
| Tolerance: | ±5% |
| Power (Watts): | 0.5W, 1/2W |
| Composition: | Metal Oxide Film |
| Features: | Flame Proof, Safety |
| Temperature Coefficient: | ±300ppm/°C |
| Operating Temperature: | -55°C ~ 235°C |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.130" Dia x 0.354" L (3.30mm x 9.00mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors
The RSF-50JR-52-3K6 series model through hole resistors are widely used in industries and fields such as telecommunications, medical, automotive, lighting, etc. This type of resistor is characterized by a small form factor, overall compact design and multiple mounting options.
The primary function of an electrical resistor is to regulate current within a circuit so that other electrical components in the same system are not overloaded or damaged. It does this by either limiting or diverting the current that is passed to various components within the circuit. This helps to dissipate any excess heat which may build up due to the resistance.
These resistors are available in a wide variety of resistance values, and can typically handle up to 3 Watts of power. The resistor material used for the RSF-50JR-52-3K6 model is usually made of a non-inductive carbon or metal film. This is an advantage over other types of resistors since there is less chance of interference from other circuit components.
The general principle for using a through hole resistor is to connect two wires to the resistor by passing them through the resistor’s holes. This allows current to run through the resistor, creating a resistance to the current which will limit or divert it. This design also prevents any short-circuiting of the resistor itself, reducing the risk of any erratic behavior.
The RSF-50JR-52-3K6 model is often used in the motor and automotive industries to prevent overloading of circuits, as well as in medical equipment for protection from electrical signals that could cause damage to sensitive equipment. This type of resistor is also used in telecommunications for the same purpose, helping to maintain stable signals within the circuit.
In general, through hole resistors are an efficient and reliable way of regulating current in a circuit. By allowing the current to pass through the resistor’s holes, the resistance can be applied in a very controlled way, allowing for an accurate current with minimal risk of component damage or short-circuiting. The RSF-50JR-52-3K6 model is an example of a high quality and efficient through hole resistor, offering excellent performance for industries and applications that require reliable and stable current control.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...