RSF100JB-73-15R

Series:	RSF
Packaging:	Bulk
Part Status:	Active
Resistance:	15 Ohms
Tolerance:	±5%
Power (Watts):	1W
Composition:	Metal Oxide Film
Features:	Flame Proof, Safety
Temperature Coefficient:	--
Operating Temperature:	-55°C ~ 235°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.177" Dia x 0.453" L (4.50mm x 11.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are one of the most widely used components in electronics. The RSF100JB-73-15R is a through hole resistor which has a wide variety of applications, and provides a reliable and cost-effective solution for a variety of electronic design needs.The RSF100JB-73-15R is a medium-sized through hole resistor with an insulated alumina insulator, suitable for a number of industrial electronics applications. It has a regulated bias voltage rating of 15 volts RMS, a low resistance tolerance of ± 0.1 ohm, and a maximum temperature rating of 125°C. The resistive element is made from a highly conductive front-side silver-plated edge-plated Ni-chrome alloy, and a back-side Sn-plated Ni-chrome alloy. This construction allows for a high level of precision and accuracy in the resistive element, making it suitable for use in applications requiring very precise resistances. The silver-plated edge-plated Ni-chrome alloy also ensures a high level of resistance against corrosion and environmental damage.In terms of applications, the RSF100JB-73-15R is most commonly used in applications where very precise resistances are needed, such as in motor speed control, audio signal attenuating, and in powering LED’s. It is also suitable for use in high voltage circuits and other applications requiring high currents.The working principle of the RSF100JB-73-15R is based on the principle of Ohm’s law. This law states that the current flowing through a circuit is proportional to the voltage applied across its terminals divided by the resistance. This means that if a known voltage is applied across the terminals of a circuit that has a fixed resistance, then the current will be directly proportional to the voltage. This allows for the precise control of current in various applications, and is the basis of the RSF100JB-73-15R’s operation.The RSF100JB-73-15R has a regulated bias voltage rating of 15 volts RMS, and a low resistance tolerance of ± 0.1 ohm. This means that when a known voltage is applied across the terminals of a circuit, the current flowing through the circuit can be accurately measured and controlled, providing a high level of accuracy for a wide variety of electronic design needs.The RSF100JB-73-15R is an ideal through hole resistor for applications where precision accuracy is required, and where a reliable and cost effective solution is needed. The highly conductive front-side silver-plated edge-plated Ni-chrome alloy and Sn-plated Ni-chrome alloy offers superior resistance to corrosion and environmental damage, while the adjustable bias voltage rating of 15 volts RMS and low resistance tolerance of ± 0.1 ohm provides a high level of accuracy in current control. As well as being ideal for a variety of electronic design needs, the RSF100JB-73-15R is a versatile component that can be used in a range of industrial electronics applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description