RSF1FT4R53

Series:	RSF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	4.53 Ohms
Tolerance:	±1%
Power (Watts):	1W
Composition:	Metal Oxide Film
Features:	Flame Retardant Coating, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 235°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.177" Dia x 0.433" L (4.50mm x 11.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RSF1FT4R53 is a through-hole resistor, a type of resistor specifically designed for use in circuit boards. Through-hole resistors are used in various types of electrical and electronic applications, including in semiconductor devices and integrated circuits, for power control and circuit protection. Through-hole resistors are also commonly used as the primary resistor in power supply designs, for voltage scalers and proportion protection circuits.The RSF1FT4R53 is constructed from two or more resistor elements that are bonded together at both ends. The bonding process is often referred to as a "potting" process. In this process, the elements are placed in a mold and the two ends are pressed together with an electrical grade epoxy. The epoxy provides an electrical connection between the two elements. This process allows for a maximum current rating, which can be provided in varying resistance values. The resistors also share a common insulation material, typically a type of polyester, that is also bonded between the two elements. Once the resistors are bonded together, they are placed into a through-hole housing which consists of four pins and a terminal connector. The terminal connector is typically a 3.5 mm Pin header, which is designed to fit into a standard type of hole in a circuit board. The four pins on the resistor are designed to match the holes on the circuit board.The structure of the RSF1FT4R53 ensures a secure connection to the board, and due to the resin material that provides insulation, it also ensures that there is no electrical contact between the resistor and the circuit board. The total resistance and power rating of the resistor are identified via a combination of markings imprinted on the resistor (e.g. 1W 1/4 KΩ) and are determined by the materials used in the construction of the resistor. The RSF1FT4R53 is commonly used for applications where high current, high voltage, or a need for extreme power dissipation is an issue. For these types of applications, a resistor with a high wattage, such as the RSF1FT4R53, is often required. The RSF1FT4R53 resistor is designed to operate at currents up to 1000A and can dissipate up to 1000W.Combining the total resistance of the two resistor elements of the RSF1FT4R53 and dividing it by its wattage rating determines the maximum wattage power dissipation. If the power rating is exceeded, then either the resistor will be destroyed or the circuit will be damaged. As a result, it is important to choose a resistor with an appropriate power rating for the circuit.The working principle of the RSF1FT4R53 through-hole resistor is based on the fact that the electrical resistance of a material is proportional to its cross-sectional area. This implies that increasing the cross-sectional area of the resistor would lead to an increase in the resistance. To control the resistance of the resistor, the materials used in the construction of the resistor are adjusted accordingly. In the RSF1FT4R53, two or more resistor elements are bonded together with an electrical grade epoxy. The varying widths of the resistor elements allow for a differing cross-sectional area between the elements, which leads to an overall resistance determined by the widths of the elements. In summary, the RSF1FT4R53 through-hole resistor is used in many different types of applications, especially in those where extreme power dissipation or current requirements must be met. The varying resistor widths allow for control over the total resistance, and the power rating of the resistor ensures the power dissipation and maximum current is controlled. The insulation material, epoxy, and through-hole housing provide a secure connection to the circuit board for reliable performance in even the most demanding applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description