RSF200JB-73-68K

Through hole resistors, typically abbreviated as THRs, are a type of passive electronic component which is used in electrical circuits. This type of resistor is designed with leads that are inserted into the board and used to connect the resistor to other circuits components. As with many resistor types, THRs can be used in both AC and DC circuits.

The RSF200JB-73-68K is a 0.005 ohm metal composite THRs. It features a 0.39 inch square body with two nickel plated leads. These resistors are available in both axial and radial lead configurations and are available off-the-shelf.

The primary application fields of RSF200JB-73-68K are energy metering, instrumentation, thermometers and temperature sensors. This resistor can also be used for motor control, power supply, portable communications, and radio equipment.

The working principle of RSF200JB-73-68K is quite simple. When a current flows through the resistor, a voltage drop occurs across it. The size of the voltage drop is proportional to the amount of current flowing through the resistor. This is known as Ohm’s law, and can be expressed as V = I * R, where V is the voltage drop across the resistor, I is the current flowing through it, and R is the resistance of the resistor.

The following figure shows the equivalent circuit for a resistor. As can be seen, the current entering the resistor splits into two paths, one path going through the resistor and the other path going through the wire. The current through the resistor will be proportionally less than the current through the wire, thus creating a voltage drop across the resistor.

The RSF200JB-73-68K provides excellent performance and reliability, which make it suitable for both high-end and low-end applications. It has a maximum power rating of 500 milliwatts, so it can be used in a wide range of applications. Additionally, its compact size allows it to fit easily into confined spaces.

In summary, the RSF200JB-73-68K is a THRs which can be used for a wide range of applications. It is designed with two nickel plated leads that can be inserted into the board for easy connection. It features a voltage drop of 0.005 ohms and a maximum power rating of 500 milliwatts. It is an ideal choice for energy metering, instrumentation, thermometers and temperature sensors, motor control, power supply, portable communications, and radio equipment.