RSF50SJT-PN5K6

Through Hole Resistors

Through hole resistors are passive devices designed to control the flow of electricity in an electrical circuit. They are also referred to as "through-hole" resistors, since they are typically soldered directly onto a printed circuit board (PCB) and are held in place with their leads passing through the board holes. They are among the most widely used components in electronic circuits. Through hole resistors are available in a wide range of sizes, configurations, and resistances, allowing them to be used in a variety of applications.

RSF50SJT-PN5K6 Application Field and Working Principle

The RSF50SJT-PN5K6 is a through hole resistor manufactured by RS Components that is designed to manage both large and small currents for general-purpose applications. It has a power rating of 1/2 watt and a maximum operating temperature of 125°C. The resistance range is 5k6 ohms. The tensile strength of the leads is 8.8 kgf, and the locking force is 0.6 kgf±0.2 kgf. The terminal pins are 4.2 mm long. In terms of its performance, the RSF50SJT-PN5K6 has a low noise and temperature coefficient and high reliability.

When used as part of an electrical circuit, the RSF50SJT-PN5K6 functions by reducing the amount of current that flows through the circuit. As a result, the voltage drop across the resistor is directly proportional to the current flowing through it. The size and shape of the resistor allows it to be conveniently soldered onto a PCB, and its robust design ensures that the resistor remains intact in a variety of operating conditions. The resistor can be used to control the current flow in a circuit and is typically used in power supply and voltage regulating applications.

The RSF50SJT-PN5K6 is cost-effective and reliable component for a variety of applications. It is commonly used in switching converters, power supplies, consumer electronics, telecommunications, and other general-purpose circuits. The resistor is suitable for both commercial and industrial applications and is an ideal choice for engineers and hobbyists alike. It is important to note, however, that the resistor must be used with caution, as it must be desoldered in order to be removed from the circuit.

Conclusion

In conclusion, the RSF50SJT-PN5K6 is a through hole resistor that is designed to reduce current and voltage in a variety of applications. It has a power rating of 1/2 watt and a maximum operating temperature of 125°C. It is cost-effective and reliable, making it an ideal choice for engineers and hobbyists alike. However, caution must be taken when using the resistor as it must be desoldered in order to remove it from the circuit.