| Allicdata Part #: | RSH-100-100-ND |
| Manufacturer Part#: |
RSH-100-100 |
| Price: | $ 23.17 |
| Product Category: | Resistors |
| Manufacturer: | Riedon |
| Short Description: | RES CHAS MNT 0.001 OHM 0.25% |
| More Detail: | 1 mOhms ±0.25% Metal Element Chassis Mount Resist... |
| DataSheet: |  RSH-100-100 Datasheet/PDF |
| Quantity: | 1000 |
| 3 +: | $ 21.05850 |
| Operating Temperature: | 30°C ~ 70°C |
| Failure Rate: | -- |
| Package / Case: | Rectangular Case - Open |
| Lead Style: | 4-Terminal |
| Height - Seated (Max): | 0.405" (10.29mm) |
| Size / Dimension: | 4.500" L x 1.000" W (114.30mm x 25.40mm) |
| Mounting Feature: | Flanges |
| Coating, Housing Type: | -- |
| Features: | Current Sense |
| Series: | RSH |
| Temperature Coefficient: | ±15ppm/°C |
| Composition: | Metal Element |
| Power (Watts): | -- |
| Tolerance: | ±0.25% |
| Resistance: | 1 mOhms |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Chassis mount resistors are widely used in a variety of electronic applications. The RSH-100-100 is a good example of this. It is a two-phase resistor system, designed for use in industrial as well as consumer electronics.
This resistor operates in two stages. In the first stage, resistance is measured between two terminals and a higher voltage is then passed through one of the terminals and a resistor. This produces a current flow through the resistor and a voltage drop across the resistor. The voltage drop is measured through an internal voltage divider that is connected to the resistor.
In the second stage, the resistance is measured again and the voltage drop is used to control a semiconductor switch. The switch turns the current on and off in order to control the amount of power applied to the load. This process helps to make sure that the required current is applied to the load without causing damage to the equipment.
The RSH-100-100 is an especially useful device in industrial control systems. Its two-phase design allows it to easily switch from low resistance to high resistance mode. This is important for applications where a high level of accuracy and control are required, such as in motor control systems. The resistor can also be used in consumer electronics for things like audio amplifiers and other audio and video devices.
The RSH-100-100 is a relatively simple device, but it has many uses and can be used in a variety of applications where precise control of current is needed. It is a reliable and economical option for industrial control systems and consumer electronics.
The specific data is subject to PDF, and the above content is for reference
AH100 10K 5% E66 E310 kOhms 5% 100W Wire...
RES CHAS MNT 4.7K OHM 5% 160W4.7 kOhms 5...
RES CHAS MNT 6.81 OHM 1% 20W6.81 Ohms 1%...
RES CHAS MNT 124 OHM 1% 20W124 Ohms 1% 2...
RES CHAS MNT 221 OHM 1% 20W221 Ohms 1% 2...
RES CHAS MNT 2.2 OHM 1% 30W2.2 Ohms 1% 3...