RSMF2JB82R0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The RSMF2JB82R0 is a type of through-hole resistor. Through-hole resistors are electronic components that are used to limit the current flow in an electronic circuit, while at the same time offering protection from overload. They are made of a material that offers higher resistance than standard copper-based electrical conductors. The RSMF2JB82R0 is an axial leaded resistor, meaning that the leads are mounted on the same axis as the resistor body. It is also a wire wound resistor, meaning that the resistor itself consists of a very thin, insulating material that is wound around an enameled copper wire.

The most common application for the RSMF2JB82R0 is in DC power circuits. They are used to protect the power circuits from surges, and to limit the current that is allowed to flow in the circuit. This limits the amount of current that can be drawn from the power source, protecting the power source as well as any components in the circuit. They can also be used to reduce the resistance of a particular circuit, increasing the amount of current that can flow.

The working principle of the RSMF2JB82R0 is quite simple. It is composed of a coil of enameled copper wire wound around an insulating material. When current passes through the wire, it generates heat. This heat is dissipated by the resistor, thus limiting the current that can flow through it. The amount of resistance is dependent on the number of turns in the wire and the type of material used to insulate it.

Aside from its use in DC power circuits, the RSMF2JB82R0 can also be used in audio circuits. The resistor works in the same way, limiting the current that can flow in the circuit. However, instead of protecting the circuit from surges, it is used to lower the level of distortion in the audio signal by limiting the amount of current that can flow.

The RSMF2JB82R0 is an important component in many electrical circuits. It can be used to protect the circuit from surges, to limit the current that can flow, and to reduce the resistance of the circuit. It is a reliable and durable component, and its use is limited only by the imagination of the person designing the circuit.

The specific data is subject to PDF, and the above content is for reference