RSMF3JT24R0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks, such as the RSF3JT24R0, are used in a variety of electronics applications. A resistor network, in general, is a combination of several resistors in a circuit where each resistor has a different resistance value. The total resistance of all resistors in the resistor network is the same as the individual resistances. The RSF3JT24R0 is designed for use with through-hole applications, meaning that the resistor leads are attached to a board through holes in the board.

The RSF3JT24R0 is a 4-resistor network with an integrated thermistor. It is composed of four resistor elements of different resistance values that are resistively connected in series and parallel combinations to match the required resistance. The integrated thermistor is also connected in series with some of the resistors and is used to regulate the overall resistance of the network in response to a change in temperature.

One of the primary advantages of using through-hole resistors is that they are self-aligning. This means that all four leads are lined up in the same direction and the resistor can be placed on the board without the need for any additional alignment. This can save time and cost when installing multiple resistors.

The RSF3JT24R0 is designed for use in high-voltage applications such as AC/DC power supplies, automotive electronics, and healthcare electronics. It can withstand high current pressures up to 14 Amps at 25°C for a typical operating temperature range of -40°C to 85°C. Its operating temperature range is limited by its maximum working voltage of 500V.

The working principle of the RSF3JT24R0 is based on the presence of two resistive elements, an integrated thermistor, and two resistors. The two resistors provide a fixed resistance of 24 Ohms. The thermistor is connected in series with one of the resistors and provides a variable resistance which is regulated by changes in temperature. The two resistive elements are connected in series and parallel combinations in order to provide the required net resistance value of 24 Ohms.

The resistor elements of the RSF3JT24R0 are designed to operate optimally over a wide range of temperatures and voltages. This allows for stable operating conditions in all operating ranges. The thermistor, meanwhile, serves to regulate the operating temperature of the resistor even if a sudden temperature change occurs in the circuit.

The RSF3JT24R0 is a great through-hole design for high-voltage applications. Its integrated thermistor enables the resistor to regulate its resistance in response to temperature changes while its compact design allows for easy installation and use. It can withstand high currents and can reliably operate over a wide range of temperatures and voltages. Most importantly, it offers reliable performance in all applications where a 24-ohm resistor is required.

The specific data is subject to PDF, and the above content is for reference