Voltage - Output 3:	--
Control Features:	Enable, Active Low
Size / Dimension:	0.86" L x 0.36" W x 0.44" H (21.8mm x 9.2mm x 11.1mm)
Package / Case:	8-SIP Module, 7 Leads
Mounting Type:	Through Hole
Efficiency:	78%
Operating Temperature:	-40°C ~ 85°C
Features:	Remote On/Off
Applications:	ITE (Commercial), Medical
Voltage - Isolation:	2kV
Power (Watts):	1W
Current - Output (Max):	200mA
Series:	ECONOLINE RSO
Voltage - Output 2:	--
Voltage - Output 1:	5V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

==================

DC DC Converters: RSO-2405S/H2 application field and working principle

DC-DC converters are an important type of power converters. They convert a DC input voltage to a different DC output voltage level, frequency, and power. The DC-DC converter is usually used in applications such as power management, motor control, automotive power systems, industrial control systems, renewable energy, instrumentation and communication systems, and consumer electronics.The RSO-2405S/H2 DC-DC converter is a high efficiency, low-cost, single-output converter. It has a wide input voltage range of 5.5V to 50VDC and an output voltage of 2.5V-42V. Its features include up to 96% efficiency, wide temperature range from -40°C to +85°C, low output ripple, low no-load power consumption, and over-current and short-circuit protection.The RSO-2405S/H2 DC-DC converter is suitable for applications such as distributed power systems, motor control, automotive, battery-powered devices, consumer electronics, medical equipment, and distributed telecommunications.The working principle of the RSO-2405S/H2 DC-DC converter is based on boundary conduction mode, or “BCM”, switching between the low-side and high-side MOSFETs in the buck-boost converter topology . When the switch is in the “low” state, the inductors charges, and the voltage across the inductor is increased. When the switch is in the “high” state, the inductors discharge, and the voltage across the inductor is decreased. This creates a cyclic process that is repeated at a given frequency.The output voltage of the RSO-2405S/H2 DC-DC converter is dependent on the duty-cycle set by the controller. The duty cycle, in turn, is set based on the desired output voltage. In this way, the output voltage can be regulated just by adjusting the duty cycle.The RSO-2405S/H2 DC-DC converter also has several protective features, such as an over-temperature protection, an over-current protection, and an over-voltage protection. The protection circuit monitors the input and output voltages and the output current and shuts down the converter if a fault is detected. This ensures that the converter is safeguarded from possible damage.In conclusion, the RSO-2405S/H2 DC-DC converter is a low-cost, high-efficiency, single-output converter that is suitable for a wide range of applications. It features wide input and output voltage ranges, high efficiency, low output ripple, and protection features. Its working principle is based on the boundary conduction mode, which enables it to maintain a continuous output voltage by adjusting the duty cycle. This makes it a reliable and cost-effective solution for many applications.

The specific data is subject to PDF, and the above content is for reference