RV-0505D/P Allicdata Electronics
Allicdata Part #:

RV-0505D/P-ND

Manufacturer Part#:

RV-0505D/P

Price: $ 11.50
Product Category:

Power Supplies - Board Mount

Manufacturer: RECOM Power
Short Description: DC DC CONVERTER +/-5V 2W
More Detail: Isolated Module DC DC Converter 2 Output 5V -5V ...
DataSheet: RV-0505D/P datasheetRV-0505D/P Datasheet/PDF
Quantity: 1000
15 +: $ 10.45300
Stock 1000Can Ship Immediately
$ 11.5
Specifications
Current - Output (Max): 200mA, 200mA
Size / Dimension: 1.27" L x 0.58" W x 0.45" H (32.4mm x 14.7mm x 11.4mm)
Package / Case: 24-DIP Module, 14 Leads
Mounting Type: Through Hole
Efficiency: 75%
Operating Temperature: -40°C ~ 85°C
Features: SCP
Applications: ITE (Commercial), Medical
Voltage - Isolation: 6kV
Power (Watts): 2W
Series: ECONOLINE RV
Voltage - Output 3: --
Voltage - Output 2: -5V
Voltage - Output 1: 5V
Voltage - Input (Max): 5.5V
Voltage - Input (Min): 4.5V
Number of Outputs: 2
Type: Isolated Module
Part Status: Active
Packaging: Tube 
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters provide regulated power outputs from unregulated power sources, making them invaluable for a variety of applications. The RV-0505D/P DC-DC converter is one such product, capable of operating from 5 VDC and rated for up to 500 W, with features such as current-limit protection and over-voltage protection. This article will discuss the potential applications of the RV-0505D/P, as well as its working principle.

The RV-0505D/P is ideal for a variety of applications that require a regulated power output from a 5 VDC source. It can be used for point-of-load regulation, telecom applications, automotive applications, and more. It can provide up to a 500 W output, making it a great choice for high-power applications. It offers various levels of protection, including over-voltage and current-limit protection, which can help to prevent damage in the event of power surges or short circuits. The RV-0505D/P is also designed to provide a low input current ripple, as well as low noise levels.

The RV-0505D/P is based on a buck-type topology and uses synchronous rectification technology to convert AC input to DC output. First, a full bridge rectifier is used to convert the AC input to DC, then a low-ripple LC filter is employed to minimize any input ripples. The DC is then filtered and fed to the switching section of the converter. The switching section consists of four high-efficiency MOSFETs and a switching controller. The switching controller provides the converter with a pulse width modulation (PWM) waveform, which is used to control the MOSFETs. This PWM waveform also provides for power conversion efficiency improvements.

The PWM waveform is used to switch the four MOSFETs in a buck-type topology. This topology uses two MOSFETs in a push-pull configuration to control the output voltage. When the MOSFETs are switched ON, the input voltage is applied directly to the output. When they are switched OFF, the energy stored in the inductor is used to maintain the output voltage. The duty cycle of the PWM waveform determines the output voltage.

Next, an LC filter removes any high frequency noise generated during the switching process. Then, an output voltage voltage regulator is used to regulate the output voltage to the desired value. The output of the regulator is then sent to the output terminals. Finally, a current sense resistor is used to measure the output current, and the signal is used to activate the over-current protection feature of the converter.

In summary, the RV-0505D/P is a high-efficiency, low-noise DC-DC converter, which is ideal for applications requiring a regulated 5 VDC power output. It can handle up to 500 W of output power, and offers features such as current-limit protection and over-voltage protection. The RV-0505D/P utilizes a buck-type topology with synchronous rectification technology to convert AC input to DC output, with voltage regulation provided by an LC filter and output voltage regulator.

The specific data is subject to PDF, and the above content is for reference

Latest Products
AEQ20B48N-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48N-6L Allicdata Electronics
AEQ20B48-L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-L Allicdata Electronics
AEQ20B48-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-6L Allicdata Electronics
AEO40Y48N-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48N-6L Allicdata Electronics
AEO40Y48-L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-L Allicdata Electronics
AEO40Y48-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-6L Allicdata Electronics