| Allicdata Part #: | RW2-0509S/H3-ND |
| Manufacturer Part#: |
RW2-0509S/H3 |
| Price: | $ 12.26 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | RECOM Power |
| Short Description: | DC DC CONVERTER 9V 2W |
| More Detail: | Isolated Module DC DC Converter 1 Output 9V 222... |
| DataSheet: |  RW2-0509S/H3 Datasheet/PDF |
| Quantity: | 1000 |
| 20 +: | $ 11.14850 |
| Current - Output (Max): | 222mA |
| Size / Dimension: | 0.95" L x 0.57" W x 0.38" H (24.2mm x 14.5mm x 9.7mm) |
| Package / Case: | 16-DIP Module, 6 Leads |
| Mounting Type: | Through Hole |
| Efficiency: | -- |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | SCP |
| Applications: | ITE (Commercial), Medical |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 2W |
| Series: | ECONOLINE RW2 |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 9V |
| Voltage - Input (Max): | 9V |
| Voltage - Input (Min): | 4.5V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are electronic components or assemblies that convert electrical energy from one form of electricity to another. The RW2-0509S/H3 DC DC converter is a small-size, sealed, open-frame DC-DC converter that can be used in a variety of applications. The converter operates with both high and low input voltage levels making it a very versatile piece of equipment.
Applications
The RW2-0509S/H3 DC DC converter is able to operate with a wide range of input voltage levels, ranging from 9-50V. This makes the device suitable for many various applications. It is most commonly used in battery powered equipment, medical equipment, communications equipment, security equipment, and lighting. It can also be used in automotive, industrial, and consumer applications where space is limited.
The RW2-0509S/H3 is designed to be used with either isolated or non-isolated outputs, making it an ideal power supply solution for high voltage industrial applications as well. Its compact size and high efficiency make it a perfect choice for applications where space and energy saving are paramount.
Working Principle
The basic working principle of the RW2-0509S/H3 DC DC converter is to convert the input voltage from one level to another. It is based on the switching technology, using an insulated gate bipolar transistor (IGBT) to regulate the current or voltage.
In the initial phase, the IGBT will be switched on when the voltage is applied across the converter. This will cause a change in the DC link voltage which in turn will cause the output voltage to increase. When the output voltage reaches the maximum set point, the IGBT will be switched off, thus stopping the current flow. In this state, the output voltage will remain steady until the next switch cycle. During the output voltage decrease phase, the IGBT will switch on again allowing the current to again flow, thus decreasing the output voltage.
The operation of the RW2-0509S/H3 DC DC converter is fully controllable when the correct parameters are set. Its input voltage range and its short-circuit protection makes it ideal for many applications. The stability and efficiency of this device can be improved by using a voltage feedback circuit. This type of circuit adjusts the current or voltage in order to maintain a constant output voltage. The RW2-0509S/H3 DC DC converter is a reliable and effective component for applications where space is at a premium.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...