| Allicdata Part #: | RW2-2409D/H3-ND |
| Manufacturer Part#: |
RW2-2409D/H3 |
| Price: | $ 12.51 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | RECOM Power |
| Short Description: | DC DC CONVERTER +/-9V 2W |
| More Detail: | Isolated Module DC DC Converter 2 Output 9V -9V ... |
| DataSheet: |  RW2-2409D/H3 Datasheet/PDF |
| Quantity: | 1000 |
| 20 +: | $ 11.37020 |
| Current - Output (Max): | 111mA, 111mA |
| Size / Dimension: | 0.95" L x 0.57" W x 0.38" H (24.2mm x 14.5mm x 9.7mm) |
| Package / Case: | 16-DIP Module, 6 Leads |
| Mounting Type: | Through Hole |
| Efficiency: | 81% |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | SCP |
| Applications: | ITE (Commercial), Medical |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 2W |
| Series: | ECONOLINE RW2 |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -9V |
| Voltage - Output 1: | 9V |
| Voltage - Input (Max): | 36V |
| Voltage - Input (Min): | 18V |
| Number of Outputs: | 2 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC (direct current-direct current) Converters are commonly used to convert direct current (DC) electrical energy from one voltage level to another. The RW2-2409D/H3 is a modern DC-DC converter that is used to safely and reliably power electrical equipment from a variety of power sources. This article will discuss the application fields and working principle of the RW2-2409D/H3.
A DC-DC converter can be used to provide power for a variety of applications such as industrial equipment, consumer electronics, and motor vehicles. The RW2-2409D/H3 is a very popular choice due to its high efficiency, light weight, and low cost. It is designed to meet the stringent requirements of aviation electronics, military equipment, and other highly demanding applications.
The RW2-2409D/H3 is a compact, efficient power source that is designed to regulate the output of a variety of DC sources. It uses a switching topology to provide smooth and low noise power regulation over a wide range of input voltage levels. The output of the converter can be programmed to any value within a certain range, depending on the desired application.
The RW2-2409D/H3 is extremely efficient, with a total efficiency that reaches up to 96%. It is also designed to operate with low noise and low ripple, which is especially important in noise sensitive applications. The converter also has a wide operating temperature range, making it suitable for use in extreme conditions.
The operating principle of the RW2-2409D/H3 is relatively simple. It consists of a switch mode power supply (SMPS) and a control circuit. The SMPS converts the input voltage into a constant DC voltage, while the control circuit regulates the output voltage. The output voltage can be adjusted using a special potentiometer or by adjusting the voltage generated by the SMPS.
The RW2-2409D/H3 is an ideal choice for a variety of applications due to its high efficiency, light weight and low cost. It is designed to meet the stringent requirements of aviation electronics, military equipment, and other highly demanding applications. Its compact size and low ripple make it a great option for applications where a clean and noise-free power supply is needed.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...