RW2-243.3D/H2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are a key component of power electronics, used in a variety of applications, from cars to laptops and consumer devices. The RW2-243.3D/H2 is a high power step-down DC-DC converter specifically designed for automotive and industrial applications with wide input voltage range and high input surge capability.

The RW2-243.3D/H2 provides 4:1 input voltage range from 6V to 24V, allowing it to be used in 24V environments, with a maximum input rating of 25V (6~25V). It has a single output of 3.3V rated at 12A with a nominal efficiency of up to 96%. It offers a wide range of features, such as adjustable output voltage range, diode emulation mode, short-circuit protection, over temperature protection, under voltage lockout, and over voltage protection.

This converter also has a wide operating temperature range from -40 to +85°C, making it suitable for use in harsh environments. It also has a built-in magnetic feedback circuit which provides excellent load and line regulation, thus ensuring the output voltage remains stable and accurate even when faced with varying loads. This converter also has low input and output ripple, which allows it to cope with more demanding loads.

As far as the working principle of the RW2-243.3D/H2 is concerned, it is based on the Buck topology, which consists of a power switch, an inductor, and a diode, with additional capacitors for input and output filtering. The output voltage is regulated by a Pulse Width Modulation (PWM) controller, which adjusts the switch duty cycle to regulate the output voltage according to user input.

When the converter is in operation, the power switch is connected to the input voltage, and the inductor stores the energy. The current increases as the inductor output voltage increases. When the current reaches the maximum voltage, the switch is turned off, allowing the stored energy to be released. At the same time, the diode prevents the output voltage from rising. This generates PWM pulses which are then fed to the controller, which uses the input signals to adjust the output voltage.

In summary, the RW2-243.3D/H2 is an excellent DC-DC converter for a variety of automotive and industrial applications. With its wide input voltage range, adjustable output voltage, and excellent load and line regulation, this converter is able to provide a stable and reliable power solution. Its working principle is based on the Buck topology which utilizes a power switch, an inductor, a diode, and a controller to regulate the output voltage.

The specific data is subject to PDF, and the above content is for reference