Allicdata Part #: | RW2-4815D/H2/SMD-ND |
Manufacturer Part#: |
RW2-4815D/H2/SMD |
Price: | $ 15.04 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | RECOM Power |
Short Description: | DC DC CONVERTER +/-15V 2W |
More Detail: | Isolated Module DC DC Converter 2 Output 15V -15V ... |
DataSheet: | RW2-4815D/H2/SMD Datasheet/PDF |
Quantity: | 1000 |
20 +: | $ 13.66850 |
Package / Case: | 16-SMD Module, 6 Leads |
Size / Dimension: | 0.95" L x 0.57" W x 0.40" H (24.2mm x 14.5mm x 10.2mm) |
Series: | ECONOLINE RW2 |
Packaging: | Tube |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 2 |
Voltage - Input (Min): | 36V |
Voltage - Input (Max): | 72V |
Voltage - Output 1: | 15V |
Voltage - Output 2: | -15V |
Voltage - Output 3: | -- |
Current - Output (Max): | 67mA, 67mA |
Power (Watts): | 2W |
Voltage - Isolation: | 2kV |
Applications: | ITE (Commercial), Medical |
Features: | SCP |
Operating Temperature: | -40°C ~ 85°C |
Efficiency: | 83% |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction to DC DC Converters
DC DC converters are commonly used power components that allow a steady current of power to travel between two sources of direct current. This type of power converter is used to increase or decrease the voltage levels and currents of DC-powered equipment connected to a circuit. DC-DC converters come in many varieties, and the RW2-4815D/H2/SMD is a particular type of switch-mode DC-DC converter. This article will discuss the application field and working principle of the RW2-4815D/H2/SMD DC-DC converter.
Application Field of the RW2-4815D/H2/SMD
The RW2-4815D/H2/SMD is designed to be used with applications requiring high efficiency and power density. This type of converter is particularly suited to applications where current levels are typically low and space is limited, such as medical imaging, test and measurement, industrial automation, optical networks, networking, and telecommunication systems. They can provide power output of up to 40W and operate at an input voltage range of 9 to 48V DC.
Working Principle of the RW2-4815D/H2/SMD
The working principle of the RW2-4815D/H2/SMD is based on a switching circuit, in which a pair of switching transistors alternately convert a direct current source into an alternating current signal of a given frequency, and then in turn, convert the AC signal into a direct current of a desired voltage. The primary side of the converter consists of the switching transistors and two inductors connected in series. The transistors are triggered by a driving circuit, which in turn is controlled by a feedback system that monitors the output voltage and adjusts the duty cycle of the switching transistors accordingly. On the secondary side of the circuit, the current is rectified by a pair of diodes to create the DC output.
Conclusion
The RW2-4815D/H2/SMD is a switch-mode DC-DC converter designed for applications with limited power requirements and space constraints. Its operating principle is based on a switching circuit, and its feedback system is adjustable to ensure the output voltage is consistent and stable. This type of converter offers high efficiency and power density, and is well-suited to applications like medical imaging, test and measurement, industrial automation, optical networks, networking, and telecommunication systems.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...