| Allicdata Part #: | RW2-483.3D/B-ND |
| Manufacturer Part#: |
RW2-483.3D/B |
| Price: | $ 13.01 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | RECOM Power |
| Short Description: | DC DC CONVERTER +/-3.3V 2W |
| More Detail: | Isolated Module DC DC Converter 2 Output 3.3V -3.3... |
| DataSheet: |  RW2-483.3D/B Datasheet/PDF |
| Quantity: | 1000 |
| 22 +: | $ 11.83400 |
| Current - Output (Max): | 250mA, 250mA |
| Size / Dimension: | 0.87" L x 0.49" W x 0.33" H (22.1mm x 12.6mm x 8.5mm) |
| Package / Case: | 16-DIP Module, 6 Leads |
| Mounting Type: | Through Hole |
| Efficiency: | -- |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | SCP |
| Applications: | ITE (Commercial), Medical |
| Voltage - Isolation: | 1kV |
| Power (Watts): | 2W |
| Series: | ECONOLINE RW2 |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -3.3V |
| Voltage - Output 1: | 3.3V |
| Voltage - Input (Max): | 72V |
| Voltage - Input (Min): | 36V |
| Number of Outputs: | 2 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
.DC DC Converters have always been a great asset in the field of electrical and electronic engineering. The RW2-483.3D/B DC DC Converter is no exception, and it provides a reliable and efficient source of electrical power for many applications. In this article, we will discuss the application field and working principle of the RW2-483.3D/B DC DC Converter.
The RW2-483.3D/B DC DC Converter is a high-performance device designed for the conversion of DC power from a source such as a battery or a power supply, to a much lower output voltage. It can be used in many applications including medical equipment, navigation and surveillance systems, and telecommunications. It has a wide input voltage range of 12V to 40V and an output voltage range of 0V to 4V. The RW2-483.3D/B has a conversion efficiency of up to 95%. This makes it suitable for use in applications where power efficiency and reliability are of the utmost importance.
The RW2-483.3D/B works by converting the direct current (DC) input power to an alternating current (AC) output waveform. The device uses a pulse width modulation (PWM) technique to switch the transistors on and off. This produces an output voltage waveform which is proportional to the input voltage waveform. The output voltage waveform is then filtered to remove any unwanted high-frequency components. To maintain the required output voltage, the converter has an internal regulator. This keeps the output voltage within a very tight tolerance of plus or minus 1%.
The RW2-483.3D/B is a high performance and reliable DC DC converter. It has an input voltage range of 12V to 40V and an output voltage range of 0V to 4V. It has a conversion efficiency of up to 95% and an output waveform with very tight tolerances. It is suitable for use in applications where power efficiency and reliability are of the utmost importance. It is a valuable asset for many applications in the field of electrical and electronics engineering.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...