RWR74N47R5FRS73

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are some of the most common electronic components used in circuit designs today. The RWR74N47R5FRS73 is a fixed resistance component that is mounted onto a printed circuit board. This resistor has multiple applications and operating principles, depending on its use.

Applications

Through Hole Resistors are primarily known for their control of current. Any circuit or device must be designed with a way to control the electronic current to prevent circuit failures. The RWR74N47R5FRS73 provides a resistive element, in which a specified amount of current passes through. This current control helps to protect circuit boards from overloads or excessive power supply.

The RWR74N47R5FRS73 can also be used for signal conditioning. By adding a resistor in a circuit, it is possible to reduce spikes/ripples or to mask out weaker signals. The RWR74N47R5FRS73 can also be used adjust the frequency characteristic or amplifying a signal.

Finally, the RWR74N47R5FRS73 can serve as grounds or decoupling capacitors. A resistor acts as a shunt in these applications, providing a path for excess current to dissipate. This helps to regulate the voltage of a circuit, reducing the chances of power supply-induced noise.

Working Principle

The RWR74N47R5FRS73 is a through-hole resistor, meaning that it is mounted onto the surface of a printed circuit board. This type of resistor consists of an element material, such as carbon or metal film, which creates a resistive path between two terminals. The resistor is usually surrounded by an insulation material, which prevents the electricity from leaking to other parts of the circuit.

As current passes through the resistor, a voltage drop is created. The amount of voltage drop depends on two factors: the resistance of the resistor and the amount of current passing through it. The amount of resistance is determined by the size and material of the resistor, and the amount of current is determined by the type of application the resistor is being used for.

Increasing the size of the resistor increases its total resistance, lowering the amount of current that is allowed to pass through it. However, keeping the resistance too low could cause the resistor to overheat, leading to circuit failure. The temperature of the resistor is kept in check by attaching a heat sink, as well as placing the resistor in a well-ventilated area of the circuit board.

Conclusion

The RWR74N47R5FRS73 is a through-hole resistor, designed to regulate and control the electronic current in circuits. As a fixed resistor, it has a constant resistance value and it can be used for various applications, including current control, signal conditioning, or grounding/decoupling. The amount of resistance and current are determined by the size/material of the resistor and the type of application, respectively.

The specific data is subject to PDF, and the above content is for reference