RWR80S1000FRB12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors come in a variety of packages and power ratings and may have either single or multiple resistance values. RWR80S1000FRB12 is one of these through-hole resistors and its application field and working principle will be discussed in this article.

RWR80S1000FRB12 is a through-hole resistor with a power rating of 0.5W and a resistance value of 1000 ohms (1Kohm). The size of this component is a standard 8mm x 11mm, allowing it to be used in a wide variety of applications. It is a unidirectional device, meaning it only works in one direction; if it is reversed, it will not work correctly.

RWR80S1000FRB12 is suitable for applications that require lower resistance values such as logic circuits. It is also used in many electronic devices and circuits where precise resistors are needed such as in voltage dividers. It is also utilized in power supplies to provide current limiting and protection for components.

The working principle of the RWR80S1000FRB12 is simple. It limits the flow of current by reducing the voltage. This is done by using the Ohm’s Law equation, V = I x R, which states that voltage (V) is equal to current (I) multiplied by resistance (R). In this case, the resistance (R) is 1000 ohms, therefore less current will flow through the resistor.

RWR80S1000FRB12 is a through-hole resistor which is made of an alloy material. It is composed of an insulating layer and a resistive material. The resistive material is made up of small particles that are distributed unevenly through the insulating layer. When a current passes through these particles, the resistance increases and decreases relative to the current.

This type of resistor is ideal for applications that require low power consumption and consistent performance. Its high accuracy and stability provide users with reliable results. The resistors are also easy to use and install as they have leads that can be directly soldered onto a printed circuit board.

In conclusion, RWR80S1000FRB12 is a through-hole resistor that can be used in low power applications that require precise resistors. It is a unidirectional device and its working principle is based on the Ohm’s Law equation. The high accuracy and stability of the resistor make it ideal for applications that need consistent performance. Its compact size and ease of installation make it a popular choice for many electronics and electrical engineers.

The specific data is subject to PDF, and the above content is for reference