RWR80S1071FSS73

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors refer to resistors composed of a small, movable, metal wire core, surrounded by a larger conductive frame, which is then covered with a protective resin. They are often used when the resistor is subject to a large amount of mechanical force. Through hole resistors are both reliable and robust; however, they are low power-consuming components and as such often used in the design of high-end, low-power applications.The RWR80S1071FSS73 is a type of through hole resistor designed for use in small and medium size applications. It is a low cost alternative to SMD and provides similar levels of performance and reliability.

Application Field and Working Principle of RWR80S1071FSS73

The RWR80S1071FSS73 is a through hole resistor designed to fit into small and medium size applications. The RWR80S1071FSS73 has two main application fields, that is, in automotive and industrial environments. In such applications, the RWR80S1071FSS73 is often used for current and voltage limiting, providing electrical isolation, and dissipating power in power system components.

The RWR80S1071FSS73 works on the principle of Ohm’s law, which states that the current (I) passing through a conductor is directly proportional to the potential difference (V) across it, and inversely proportional to its resistance (R). This equation shows how by varying the resistance in a circuit, the current flow and potential difference can be regulated. In the case of the RWR80S1071FSS73, its design allows for a greater range of current to flow through it compared to other, smaller through hole resistors.

The RWR80S1071FSS73 has two contacts, one at each end. The contact at one end is commonly referred to as the “hot” end. This is the end that is connected to the voltage or current source that will be regulated. The other contact is the “cold” end and is connected to the load side of the application. The RWR80S1071FSS73 is typically placed in the circuit such that the hot end is connected to the voltage or current source and the cold end is connected to the load. This arrangement will allow the RWR80S1071FSS73 to limit the current or voltage to the load and protect from any overload or underload conditions.

The RWR80S1071FSS73 can also be used in other applications that require current or voltage control. For example, the RWR80S1071FSS73 can be used for temperature or pressure control in industrial machines, or even in sensors and radio frequency applications.The RWR80S1071FSS73 is an excellent choice for applications where size or cost constraints are present and reliable performance is required. Its robust design and reliable operation make it suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference