RWR80S1R43FSS73

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A resistance found in electronic circuits, the RWR80S1R43FSS73 is a through hole resistor. Through hole resistors are the most common type of resistors. They are mounted onto printed circuit boards (PCB) and have metal leads which are soldered into the board. They come in several sizes and in either axial or radial lead configurations.

A through hole resistor consists of four parts: the resistor body, the two metal leads, and the resistor marking. The resistor body is typically made of ceramic or carbon film. The metal leads are most commonly made of copper or a copper alloys and are used to secure the resistor to the board. The marking which is usually printed or stamped onto the body of the resistor identifies the value of the resistor. The resistor value is usually written as a set of three digits followed by two letters. The first two digits represent the first two digits of the ohms value, the third digit is a multiplier and the last two letters represent the tolerance of the resistor.

There are several common applications for through hole resistors including audio amplifiers, radios, modems and power supplies. These resistors are used to control the current or voltage in an electronic circuit. The resistor limits the amount of current flowing in the circuit, which prevents damage to the components in the circuit. In addition, the resistor also helps to minimize noise and distortion in the circuit. The most common type of through hole resistor, the RWR80S1R43FSS73, is commonly used in power supplies, audio amplifiers, radio transmitters and receivers.

In terms of working principle, through hole resistors work in a similar manner to other resistor types. When a voltage is applied to the resistor leads, an electrical current will be created. This current is then passed through the resistor body, which generates heat. This in turn causes the resistor to have a certain resistance. The resistance of the resistor is directly proportional to the amount of current flowing through it. The resistance of the resistor can be easily adjusted by adjusting the voltage of the applied current.

With a wide range of applications, through hole resistors are one of the most commonly used components in electronic circuits. The RWR80S1R43FSS73 is a through hole resistor that is used for specific purposes in power supply, audio amplifier, radio transmitter and receiver, and other electronic circuits. A through hole resistor consists of a resistive element which has two metal leads and a marking indicating the value and tolerance of the resistor.

When a voltage is applied to the resistor leads, an electrical current is produced which passes through the resistor body. This effect generates heat and produces a resistance value which is directly proportional to the amount of current passing through the resistor. Through hole resistors are used to control the current or voltage in an electronic circuit and reduce any noise or distortion in the circuit.

The specific data is subject to PDF, and the above content is for reference