RWR80S2100FRS70

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are components widely used in electronic circuits, of which RWR80S2100FRS70 is a popular and reliable choice. RWR80S2100FRS70 consist of two parts, a resistor and a printed circuit board, which are connected together by insertion technology. Insertion, also known as axial, refers to the process of connecting two wires by passing them through holes in the printed circuit board. The main application field of RWR80S2100FRS70 is power electronics, such as providing protection against over-current, high voltage, and over-heating.

RWR80S2100FRS70 has a wide range of resistance values, from 0.25 to 3.5 ohms. It is suitable for most of the power electronic equipment, due to its low voltage rating and relatively high current capacity. The shape of the resistor, combined with its large area-to-volume ratio, ensures excellent electrical contact between the board and the resistor, which is important for power devices.

The perforated board of RWR80S2100FRS70 has slotted copper bars running across the unit. The resistors are connected to the copper bars, and the signal flows through them. The slotted copper bars help to absorb the power generated by the device and disperse the heat, which helps to prevent damage from the same. Moreover, this process also increases the reliability of the resistor.

In addition, RWR80S2100FRS70 resistors also provide short-circuit protection. As the current rate rises above the predetermined limit, the resistor begins to act as a fuse, melting and breaking the circuit in the process. This feature makes RWR80S2100FRS70 suitable for use in high-power electronic circuits, especially in applications such as high-voltage rectifiers and power inverters.

The working principle of RWR80S2100FRS70 is quite straightforward. When current is applied to the circuit, the voltage drop across the resistor causes the components in the circuit to be energized. This causes a flow of electrons through the resistor, which is then converted into heat and dissipated from the surface of the resistors. This heat is necessary, as it prevents the circuit from overheating.

RWR80S2100FRS70 through hole resistors are an integral part of many power electronic circuits. Their wide range of resistance values, high current capacity, and short-circuit protection capabilities make them the ideal solution for the demanding environment of power electronics. Moreover, their innovative design and superior technology make them a reliable and cost-effective choice for any application.

The specific data is subject to PDF, and the above content is for reference