RWR80SR887FRS73

Through Hole Resistors

A through hole resistor is an electronic component with resistances ranging from fractions of an ohm to hundreds of kilo ohms. It is a two-terminal, passive component, usually composed of a ceramic or metal body a ceramic or metal core and an insulating material to protect the core from external influences. The Resistor is one of the most important components, and its use can be seen in almost every electric and digital circuit today.

RWR80SR887FRS73 Application Field and Working Principle

The RWR80SR887FRS73 is a through hole resistor with resistance up to 800 ohms. It is mainly used in electric and digital circuits to regulate the voltage or current flow. Its application can be seen in circuits that require precise adjustment of signals for analog or digital measurements. It is especially useful in switching and mixed signal applications. The RWR80SR887FRS73 achieves its resistive effects through an inductive effect, caused by the resistance of the device oscillating around the core of the device. This in turn causes the current flowing through the device to vary with respect to the voltage applied.

The RWR80SR887FRS73 can also be used in applications that require temperature compensation, such as in heater control or thermostat controlling systems. It can also be used in power circuits to limit the flow of electricity. The device is equipped with a minimum and maximum temperature rating, allowing it to be used in high temperature applications as well.

When used in combination with other components, the RWR80SR887FRS73 can be used to create opamp circuits, as well as filter circuits for signal processing. In microwave applications, these components can be used to create high power switches and attenuators. They are also able to detect the smallest of faults in circuits.

In addition to its application in regulated circuits, the RWR80SR887FRS73 can also be used in transient applications, such as in power electronics. The wide range in power ratings of the component makes it suitable for various applications, depending on the power level required.

Conclusion

The RWR80SR887FRS73 is a through hole resistor with a resistance value of up to 800 ohms. It can be used in circuits that require precise voltage and current regulation, as well as in high power applications. It can also be used in transient applications, such as power electronics. The RWR80SR887FRS73 is a versatile component, with a wide range of applications in electric and digital circuits.