RWR82S1000FSS73

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors, such as RWR82S1000FSS73, are used in various applications and have been around for decades. They serve the purpose of limiting electricity and providing the current to the right magnitude and reducing excessive current which would otherwise lead to problems. RWR82S1000FSS73 is a resistor type that fits into a standard through hole package.

The primary application of this type of resistor is providing a current limit and voltage drop in DC and AC circuits. They have a very wide usable range in terms of power handling capability, meaning that they can handle high current loads with minimal voltage drop. This makes them ideal for applications such as power supplies, motor control circuits, and pulse-width modulation circuits.

The working principle of Through Hole Resistors, such as RWR82S1000FSS73, is based on Ohm\'s Law. This law states that the current flowing through a device is proportional to the voltage supplied to it. In the case of the RWR82S1000FSS73, the resistor works by limiting the current flow between two points in a circuit, resulting in a voltage drop.

The RWR82S1000FSS73 is made up of a set of metal contact strips that are welded onto a ceramic substrate. The contact strips are the electrodes that are connected to the power source and the load. The ceramic substrate acts as the resistor\'s body and contains a special material, such as manganese-zinc or aluminum oxide, which resist the current.

When current moves through the Through Hole Resistor, such as the RWR82S1000FSS73, the contact strips heat up due to the resistance in the material. This causes the material to become less resistive, thus allowing more current to flow through. This reduces the voltage and current levels, thus increasing efficiency and preventing excessive current.

The sizes and types of Through Hole Resistors vary depending on the application. The RWR82S1000FSS73 is available in sizes from 0201 to 1210, with a tolerance of 1%. The maximum power rating for the RWR82S1000FSS73 is 1 Watt, and the temperature coefficient is 100 ppm per degree Celsius.

Overall, the RWR82S1000FSS73 Through Hole Resistor is a popular choice for many applications where a current limiting device is needed. It is highly durable and its low temperature coefficient makes it suitable for many applications. The working principle of the Through Hole Resistor is based on Ohm\'s Law, which states that the current flowing through a resistor is proportional to the voltage supplied to it.

The specific data is subject to PDF, and the above content is for reference