RWR89S15R8FRS73

Series:	Military, MIL-PRF-39007, RWR89S
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	15.8 Ohms
Tolerance:	±1%
Power (Watts):	3W
Composition:	Wirewound
Features:	Military, Moisture Resistant
Temperature Coefficient:	±30ppm/°C
Operating Temperature:	-55°C ~ 250°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.187" Dia x 0.560" L (4.75mm x 14.22mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	R (0.01%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are one of the most common electrical components found in everyday use. They are used to reduce electrical current flowing through circuits, or to reduce the voltage across a device. The RWR89S15R8FRS73 is an example of a through hole resistor.Through hole resistors come in a variety of sizes and shapes. The RWR89S15R8FRS73 is a small two terminal through hole resistor that has a resistance value of 15 Ohms. The resistor is made of a silicon substrate which is then coated with an epoxy coating. It has an operating temperature range of -55 to +125 degrees Celsius.The RWR89S15R8FRS73 is typically found in high voltage applications, such as in circuit breakers and transformers. It is used to reduce the amount of current that flows through the circuit in order to prevent burn out or damage to other components in the circuit. It is also often used to reduce the voltage across a device, such as a motor or generator.The working principle of the RWR89S15R8FRS73 is similar to that of all resistors. Resistance is an opposition to the flow of electrical current. When electrical current flows through the resistor, a portion of the energy is lost in the form of heat. The amount of energy that is lost is determined by the resistance of the resistor and the amount of current flowing through it.The resistance of the resistor limits the amount of current that can flow through it. The smaller the resistance, the more current that can flow. If the current flowing through the resistor is greater than the resistance, then the resistor will become hot and may eventually be damaged.When the RWR89S15R8FRS73 is used in high voltage applications, it is usually wired in series with other components to create a voltage divider. The voltage divider will reduce the voltage to a safe level, thus preventing any damage to other components in the circuit.The RWR89S15R8FRS73 is a very important part of many electronic devices, and it is important to understand its applications and principles in order to effectively use it. It is a small but powerful part that is used in countless electrical systems, and its use should always be carefully considered.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description