RWR89S1R00FRS70

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors are an integral part of electronic components used in a variety of applications and are particularly useful for controlling large currents and voltages. The RWR89S1R00FRS70 is a type of through-hole resistor that provides precise and reliable power dissipation for various applications. This section will discuss the application field and working principle of the RWR89S1R00FRS7.

The RWR89S1R00FRS7 through-hole resistors are typically used in high-power areas such as consumer electronics, industrial machinery, and electric cars. It provides high levels of power dissipation in exchange for a relatively low cost. When used in these applications, it is able to withstand large instantaneous current and voltage levels. It is also recommended for applications that require maintaining a constant impedance or resistance value over a wide temperature range.

The RWR89S1R00FRS7 resistors are able to handle simultaneous large current and voltage across a wide temperature range due to their high power dissipation rating. They can handle current between 1 and 5A and voltage ranging from 25 to 100V. The resistance rating of these devices is from 1 ohms to 10 kilohms. The power dissipation capability of these resistors is between 0.5 and 150W, depending on the model.The resistors are made of either metal or non-metallic resistors, depending on the application.

The working principle of the RWR89S1R00FRS7 resistors is based on the same principles as all through-hole resistors. When working at low to moderate frequencies the resistance is determined by the Ohm’s law. Under normal conditions, a current runs through the resistor from lower to higher potentials, resulting in a voltage drop across the resistor. This voltage drop results in a certain amount of power dissipation in the resistor.

In higher frequency applications, the equivalent circuit of the resistor is composed of a series combination of RLC elements. The resistor behaves like a capacitor in this configuration and is able to reduce the impedance to a certain level. The combination of resistor and capacitor can be used to filter out certain frequencies or dampen out oscillations. This makes the resistors useful for AC applications such as audio equipment and signal processing circuitry.

The RWR89S1R00FRS7 through-hole resistors are highly reliable components, which makes them popular for both high-power and low-power applications. They provide precise and reliable power dissipation across a wide temperature range and can handle large current and voltage. The resistors are available in metal and non-metallic versions, making them suitable for various applications. Additionally, their working principle is based on the same principles as all through-hole resistors, which makes them easy to understand and use.

The specific data is subject to PDF, and the above content is for reference