RWR89S3571FRS73

Series:	Military, MIL-PRF-39007, RWR89S
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	3.57 kOhms
Tolerance:	±1%
Power (Watts):	3W
Composition:	Wirewound
Features:	Military, Moisture Resistant
Temperature Coefficient:	±20ppm/°C
Operating Temperature:	-55°C ~ 250°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.187" Dia x 0.560" L (4.75mm x 14.22mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	R (0.01%)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through hole resistors are a commonly used type of passive component in an electronic circuit. They are formed by a cylindrical rod of material that has both its ends soldered onto a printed circuit board, thus forming a conduit for electric current. With their small form factor and low cost, through hole resistors are an ideal choice for a range of applications in different types of electronic equipment.In this article, we’ll be focusing on the RWR89S3571FRS73 through hole resistor, looking at the applications and working principles involved in its use.

Applications of the RWR89S3571FRS73 Through Hole Resistor

The RWR89S3571FRS73 is a general purpose through hole resistor, and is suitable for a range of applications in electronic circuits. It is usually used as the primary device in a series of devices, and can be used to decrease the flow of current, limit voltage, and prevent impedance mismatches in a system.The RWR89S3571FRS73 is able to handle an operating temperature of up to 150°C, making it suitable for use in high temperature environment such as automotive electronics and industrial equipment. It has a low noise factor and excellent physical properties, making it well-suited to many applications, such as switch circuits and power supplies.It is also commonly used in instrumentation and signal-sensing circuits, and in audio systems in particular. As the RWR89S3571FRS73 can handle up to 150mA of current with a low noise factor, it is ideal for use in audio circuits, where large amounts of current and low levels of interference need to be handled.

Working Principle of the RWR89S3571FRS73 Through Hole Resistor

When used in an electronic circuit, the RWR89S3571FRS73 through hole resistor works by providing a resistance to the flow of current. This limits the amount of current flowing through the resistor, as well as the level of voltage across the circuit.In order to provide resistance, the resistor must be able to convert the electrical energy applied to it into heat energy. This process is known as Joule heating, and it is the source of the resistor’s ability to limit the current and voltage levels in the circuit.The resistance of a resistor is usually measured in ohms. The higher the ohm rating of the resistor, the more resistance it provides to the flow of current. The RWR89S3571FRS73 has an ohm rating of 375, meaning that it provides a moderate level of resistance to the current in the circuit.

Conclusion

The RWR89S3571FRS73 through hole resistor is a versatile and cost-effective option for a range of applications. It is suitable for high temperature environments, and is able to handle up to 150mA of current with a low noise factor. Its 375 ohm rating means that it provides a moderate level of resistance to the flow of current, which makes it well-suited for use in a variety of electronic circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description