Allicdata Part #: | 1724-1105-ND |
Manufacturer Part#: |
RX-IN-PM1-28V/V-M18 |
Price: | $ 606.38 |
Product Category: | RF/IF and RFID |
Manufacturer: | Sensata-BEI Sensors |
Short Description: | SWIFTCOMM RCVR 2CH 2.4GHZ |
More Detail: | RF Sensor 2.4GHz SwiftComm™ Connector 1Mbps |
DataSheet: | RX-IN-PM1-28V/V-M18 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 551.25600 |
Series: | -- |
Part Status: | Active |
Function: | Sensor |
Modulation or Protocol: | SwiftComm™ |
Frequency: | 2.4GHz |
Applications: | Telemetry |
Interface: | Connector |
Sensitivity: | -80dBm |
Power - Output: | 17dBm |
Data Rate (Max): | 1Mbps |
Voltage - Supply: | 5 V ~ 28 V |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF receivers, transmitters, and transceivers are finished units found in electronic equipment used for wireless communication in the radio frequency (RF) spectrum. The RX-IN-PM1-28V/V-M18 electronic unit belongs to this group of components, and it has a variety of applications and a working principle that encompasses the capabilities of RF receivers, transmitters, and transceivers.
The RX-IN-PM1-28V/V-M18 is an RF receiver, transmitter, and transceiver finished unit capable of signal reception, transmission, and transmission / reception signal processing in a wide range of frequencies. It is designed for use in devices such as wireless routers, mobile phones, cordless headsets, wireless LANs, and radios.
The RX-IN-PM1-28V/V-M18 is a multi-channel RF receiver, transmitter, and transceiver with an operating frequency of 28 Volt/Volt and up to 28 channels. The RX-IN-PM1-28V/V-M18 utilizes a receiver subsystem and a general-purpose transceiver which supports a wide range of protocols for effective operation. The receiver subsystem uses a local oscillator tuned to a specific frequency, which provides the capability to receive multiple signals on different frequencies.
The transceiver system uses a switchable pre-amplifier and a highly efficient power amplifier to increase transmission range. The transceiver system also includes circuitries such as high pass filters, mixers, and a frequency synthesizer to provide multiple channels of operation. For effective signal processing, the RX-IN-PM1-28V/V-M18 utilizes an AGC (automatic gain control) system which automatically adjusts the antenna gain as signal conditions vary.
In addition, the RX-IN-PM1-28V/V-M18 incorporates an RF filtering system that helps reject noise, and it is protected by an ESD (electrostatic discharge) protection circuit. The RX-IN-PM1-28V/V-M18 is designed to be extremely robust and efficient, with a high level of performance on a wide range of frequencies.
The working principle of the RX-IN-PM1-28V/V-M18 involves the transmission and reception of the RF signals in a specific frequency range. To send signals, the unit\'s transmitter subsystem generates an alternating current signal which is sent out to the desired recipients. For reception, the RX-IN-PM1-28V/V-M18 utilizes a tuned local oscillator to receive and process the signal, which is then converted into digital signal and sent to the connected device.
The RX-IN-PM1-28V/V-M18 has a wide range of applications in consumer electronic and communications technology. This includes devices like mobile phones, radar systems, satellite communication systems, radio transmitters, broadcast receivers, and more. It is also commonly used in industrial radio communications and wireless networking applications.
In conclusion, the RX-IN-PM1-28V/V-M18 is a general-purpose RF receiver, transmitter, and transceiver finished unit. It is capable of signal transmission and reception in the 28V/V frequency range and up to 28 channels. The working principle of the RX-IN-PM1-28V/V-M18 involves the transmission and reception of RF signals using an ALO, pre-amplifier, high -pass filters, mixers, and an AGC system. The RX-IN-PM1-28V/V-M18 is suitable for a wide variety of consumer and industrial applications.
The specific data is subject to PDF, and the above content is for reference
EV-DO USB CELLULAR MODEM AERISRF Transce...
9XSTREAM 100MW RS232/485 9600BPSRF Trans...
MODEM CDMA US BUNDLE IPRF Transceiver, C...
MODEM RF 900MHZ RS232/485 W/ACCRF Transc...
EASYRADIO 433MHZ USB TRANSMITTERRF Trans...
RF TRANSCEIVER 2.4GHZ KEYFOBRF Transmitt...