S-24CS16A0I-D8S1G

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Memory Type:	Non-Volatile
Memory Format:	EEPROM
Technology:	EEPROM
Memory Size:	16Kb (2K x 8)
Clock Frequency:	400kHz
Write Cycle Time - Word, Page:	10ms
Access Time:	900ns
Memory Interface:	I²C
Voltage - Supply:	1.8 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Through Hole
Package / Case:	8-DIP (0.300", 7.62mm)
Supplier Device Package:	8-DIP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory Application Field And Working Principle of S-24CS16A0I-D8S1G

Memory can be generally defined as a form of computer data storage or device used to store digital data that is so volatile that it needs to be constantly refreshed. Common examples include ROM for program code stored in firmwares, RAM for continuous computer performance, and NAND Flash for mobile device data storage. One particular memory type is known as non-volatile memory, a type which retains its stored data even if the power is removed. This non-volatile memory usually takes the form of serial eeprom.The S-24CS16A0I-D8S1G is a serial EEPROM suitable for a variety of applications that require non-volatile memory. This memory device features 8-pin DIP (Dual Inline Package) or 8-pad SO (Small Outline) and operates at a maximum clock rate of 1MHz. The contents of the device are stored even when the power is turned off. The S-24CS16A0I-D8S1G is widely used in a variety of electronic designs, especially in mission critical applications such as automotive, industrial, aerospace, and medical electronic devices.The S-24CS16A0I-D8S1G is a two-wire serial EEPROM that operates over a single I2C bus. It incorporates a clock (SCL) and a data line (SDA), allowing for device selection and communication on the bus. It supports eight user-selectable slave addresses. The communication interface of the device is I2C compliant, which allows for communication between different components on the same bus. The device also features hardware and software write protection, making sure that critical data is not lost or overwritten.The S-24CS16A0I-D8S1G utilizes a Serial Peripheral Interface (SPI) bus for communication between a host and the device. The SPI bus allows for bi-directional serial data transfer between the two devices. The serial interface of the device is low voltage compatible, meaning that it can function properly even in lower power environments. The device is also able to operate in a 3.3V or 5V environment.The S-24CS16A0I-D8S1G is capable of 2-wire operation, which consists of two clock signals, serial data input and output pins, and an additional pin to select the device\'s desired slave address. In this mode, the SDA line is responsible for both data transmission and reception. The serial data is sent in a unidirectional manner, either from master to slave or from slave to master. This simplifies communication, as the master only needs to control the clock line to control the transmission of data.The S-24CS16A0I-D8S1G features a low-power standby mode and a wake-up function that allows the device to enter a standby mode when it is not in use. This saves power, as the device will automatically shut down during periods of inactivity. The S-24CS16A0I-D8S1G also features a page write mode, which allows multiple bytes of data to be written to the device in one go.The S-24CS16A0I-D8S1G offers an array of special programming and read functions, making it an ideal choice for applications requiring quick and efficient programming and data retrieval. It supports various memory functions such as erase, program, and read. The erase function helps reduce read errors, and the program function allows for rapid writing of data. The read command enables efficient data retrieval from the device.In summary, the S-24CS16A0I-D8S1G is a non-volatile memory device. It is a low-power, I2C and SPI compliant EEPROM with selectable voltages. It offers multiple write and read functions, and the operating frequency is 1MHz max. It is suitable for various applications, such as automotive, industrial and medical electronic devices, due to its reliable operation and low standby power. The S-24CS16A0I-D8S1G is an ideal memory solution for a variety of applications.

The specific data is subject to PDF, and the above content is for reference