S-25C010A0I-T8T1G

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Not For New Designs
Memory Type:	Non-Volatile
Memory Format:	EEPROM
Technology:	EEPROM
Memory Size:	1Kb (128 x 8)
Clock Frequency:	5MHz
Write Cycle Time - Word, Page:	4ms
Memory Interface:	SPI
Voltage - Supply:	1.6 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	8-TSSOP (0.173", 4.40mm Width)
Supplier Device Package:	8-TSSOP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Memory

The S-25C010A0I-T8T1G is a non-volatile memory device that is widely used in many applications. The S-25C010A0I-T8T1G is a Serial Peripheral Interface (SPI) Flash memory device with a wide range of features that make it suitable for many applications. It is a 1-Mb (128K × 8) SPI Flash memory device with many advanced features and functions, including Security Lockbits, Page Programming, and Multi-I/O Programming. This device is also available with a built-in temperature sensor and 3-volt regulator, making it ideal for use in temperature-sensitive applications.The S-25C010A0I-T8T1G offers a wide range of features that make it suitable for many applications. It offers a high degree of flexibility, allowing it to be used in a variety of applications. It has a fast memory access time, allowing it to be used for applications that require quick data access. It also has high data retention characteristics, making it suitable for long-term data storage applications. The device also includes built-in security features, allowing data to be securely stored.The S-25C010A0I-T8T1G is widely used in industrial applications due to its reliable operation and high performance. It is often used in industrial automation, industrial control systems, and medical applications. Additionally, the device is used in automotive applications, consumer electronics, and communication systems. The working principle of the S-25C010A0I-T8T1G is based on the Serial Peripheral Interface (SPI) communication protocol. Data is sent via an SPI bus that connects the device to a host controller. The SPI bus consists of a clock line, a data line, and a chip select line. Data is sent and received in a full-duplex manner, meaning that data can be sent and received simultaneously. Data is transferred between the host and the device using two wires; the clock line is used to synchronize the data transfer, and the data line is used to send and receive 8-bit words. The device can also be controlled via the chip select line, which is used to select the device when data needs to be transferred. Once the device is selected, it functions in a LIFO (last-in-first-out) manner. Data is transferred in First-In-First-Out (FIFO) format and is stored in a internal memory array. The internal memory array can store up to 128K × 8 bits of data, with eight bits being sent and stored on each transfers. The device is designed to provide fast write and read cycles. The write cycle is initiated by sending a write command to the device, followed by an address and the data to be written. The data is then written to the internal memory array, and the write cycle is completed. The read cycle is similar; the read command is sent to the device, followed by the address of the data to be read. The device will then return the data stored at the specified address.In addition to standard read and write operations, the S-25C010A0I-T8T1G also supports advanced features such as Security Lockbits, Page Programming, and Multi-I/O Programming. The Security Lockbits feature provides additional data security by allowing only authorized host controllers to access the device. The Page Programming feature allows data to be programmed in pages of up to 256 bytes. Finally, the Multi-I/O Programming feature allows data to be read and written in multiple I/Os (input / output) formats.The S-25C010A0I-T8T1G is an ideal choice for many applications due to its wide range of features, excellent performance, and robust security features. It is often used in industrial automation, industrial control systems, automotive applications, consumer electronics, and communication systems. Because of its compatibility with the SPI protocol, it can be easily integrated into many systems.

The specific data is subject to PDF, and the above content is for reference