Allicdata Part #: | S-8301-1-R-ND |
Manufacturer Part#: |
S-8301-1-R |
Price: | $ 4.51 |
Product Category: | Circuit Protection |
Manufacturer: | Eaton |
Short Description: | FUSE BLOCK CART 300V CHASS MNT |
More Detail: | Fuse Block 300V 1 Circuit Cartridge Chassis Mount |
DataSheet: | S-8301-1-R Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
10 +: | $ 4.09941 |
Series: | S-8000 |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Fuseholder Type: | Block |
Moisture Sensitivity Level (MSL): | -- |
Fuse Type: | Cartridge |
For Use With/Related Products: | 3AG |
Fuse Size: | 1/4" Dia x 1 1/4" L (6.4mm x 31.8mm) |
Number of Circuits: | 1 |
Voltage: | 300V |
Mounting Type: | Chassis Mount |
Orientation: | -- |
Termination Style: | Screw Terminal |
Contact Material: | Spring Bronze |
Contact Finish: | Tin-Lead |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Fuseholders are commonly used in electrical systems and households to prevent short-circuiting and reduce the risk of major electrical faults. The S-8301-1-R is a type of fuseholder designed for 1/2"x1-1/2"t-slim electrical fuses. The holder is designed so that users can easily access fuses, replace them in case of an electrical fault, and ensure that other aluminum components are not damaged.
The S-8301-1-R is made of lightweight and durable carbon steel material and is rated to 30-amp. It also carries a UL, CSA, and CE compliance designation. The product is available in either a screw-in or snap-in mounting style. The snap-in version also features a dust cap to help prevent dust and debris from entering the holder. The holders are also color coded and identified by the amperage rating on the outside to make it easier to find the required version.
S-8301-1-R is used to protect and house 1/2"x1-1/2"t-slim fuses. It is used in a wide variety of applications, such as solar power systems, wind turbines, industrial equipment, and consumer electronics. This product is also used for inductive loads, such as motors, and due to its flexible mounting style, it can be used in vertical or horizontal mounting applications.
The working principle of the S-8301-1-R is quite simple. The fuse is inserted into the holder and, when the electrical current increases past the specified rating, the fuse will heat up and disintegrate. This then interrupts the flow of electricity and prevents it from entering the protected components. The holder itself prevents any external influences, such as dust and debris, from interfering with the functionality of the fuse.
In conclusion, the S-8301-1-R fuseholder is designed to be used in applications where 1/2"x1-1/2"t-slim fuses are needed. It is made from lightweight and durable carbon steel and is rated to 30-amp. It is available in either a screw-in or snap-in mounting style. The holder is designed to protect the fuse from external influences and, when the current exceeds the rated capacity of the fuse, it will disintegrate, interrupting the flow of electricity and protecting the system.
The specific data is subject to PDF, and the above content is for reference
FUSE HLDR CART 250V 6.3A PNL MNTFuse Hol...
FUSE HLDR CART 250V 6.3A PNL MNTFuse Hol...
FUSE HLDR CART 250V 6.3A PNL MNTFuse Hol...
FUSE HLDR CART 250V 6.3A PNL MNTFuse Hol...
FUSE HLDR CART 250V 6.3A PNL MNTFuse Hol...
FUSE HLDR CART 250V 6.3A PNL MNTFuse Hol...