S-8351A30MC-J2PT2U

Voltage - Input (Max):	10V
Supplier Device Package:	SOT-23-5
Package / Case:	SC-74A, SOT-753
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C (TA)
Synchronous Rectifier:	No
Frequency - Switching:	100kHz
Current - Output:	300mA (Switch)
Voltage - Output (Max):	--
Voltage - Output (Min/Fixed):	3V
Series:	--
Voltage - Input (Min):	0.9V
Number of Outputs:	1
Output Type:	Fixed
Topology:	Boost
Output Configuration:	Positive
Function:	Step-Up
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SiP – 8351A30MC – J2PT2U is a highly integrated power management integrated circuit (PMIC) that features several voltage regulators. Typically part of Application Specific Integrated Circuit (ASIC) designs, it supports the complete power management of the system, typically providing power management capabilities with centralized control of multiple voltage regulators. This makes it ideal for a wide range of applications, such as in computers and consumer electronic products. The SiP – 8351A30MC – J2PT2U is part of the family of SiP PMICS and includes a comprehensive range of highly integrated DCDC switching regulators. It also includes multiple buck, boost and buck/boost regulators, and also some high-efficiency LDO regulators. Additionally, the SiP also features high-speed Power-On Reset (POR) circuitry, which rapidly turn-on the power system in a reliable fashion in the event of a fault. In addition to the multiple voltage regulators, the SiP – 8351A30MC – J2PT2U also features several features that make it better suited for modern power applications. It includes a very low-power start-up detection circuit, which can detect the power status of the system without consuming too much current, allowing for a swift and efficient start-up of the system.The SiP – 8351A30MC – J2PT2U also utilizes an advanced slew rate control circuit that regulates the output voltage of the regulator to ensure that it is stable and within an acceptable range, while minimizing the current consumption of the device. This helps to reduce the total cost of the system. Additionally, the SiP includes several voltage protection features, such as an overvoltage protection circuit that prevents voltage spikes from damaging the device and endangering the system, and a low-voltage protection circuit that prevents power failure from damaging the system. In terms of its working principle, the SiP – 8351A30MC – J2PT2U is designed to adjust and maintain the output voltage of the system within an acceptable range, while at the same time limiting the current consumption of the device. This is done by monitoring the voltage output of the DCDC switching regulators and regulating it by means of a PWM control loop and/or by adjusting the Duty Cycle. To minimize the current consumption of the device, the SiP utilizes low operating frequencies, both during normal operation and in synchronization with fast start-up operation. Additionally, advanced techniques are used to reduce the power consumption of the regulator to ensure that the system remains energy efficient. The SiP – 8351A30MC – J2PT2U is designed to provide reliable and stable power delivery in a very small form factor. It is suitable for a wide range of applications, such as in computers, consumer electronics, and industrial and medical equipment. Additionally, it offers multiple voltage protection features and high efficiency operation, which make it an ideal choice for modern power management.

The specific data is subject to PDF, and the above content is for reference