S-8354A40MC-JQZT2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The S-8354A40MC-JQZT2G is a controller IC recommended to use in buck switching voltage regulators with output current of 1A or lower. It is categorized as a PMIC (Power Management IC) within the Voltage Regulators, DC/DC Switching Regulators segment and is designed as a high performance, low standby current, low jitter, low noise switch regulator controller IC. This project-based IC has a wide operating voltage range of 4V to 40V and requires just four low cost external components for efficient design. This makes S-8354A40MC-JQZT2G a great choice for emerging multi-rail DC-DC converter designs.

The S-8354A40MC-JQZT2G integrates an operational transconductance amplifier (OTA) device and has been characterized with low dropout voltage. It also includes a built-in error amplifier and a synchronous rectifier control circuit. This enables it to provide greater output accuracy, improved light load efficiency, and superior line and load transient response as compared to conventional PWM ICs. The IC operates depending on its input voltage and output voltage, and provides a reliable, highly efficient power conversion.

A wide range of applications can benefit from the design and construction of the S-8354A40MC-JQZT2G IC. As the IC includes three selectable operating modes (fixed PWM, preset PWM and Forced Pulse Frequency Modulation), it can be used for notebooks, tablet PCs, games and other handheld devices for efficient power management. The IC uses a very low quiescent current of only 0.9uA and is also used in industrial systems, battery operated equipment and mobile systems. The S-8354A40MC-JQZT2G functions through the use of an oscillator, an error amplifier, a voltage reference, a power switch and an operational transconductance amplifier (OTA).

The oscillator controls the frequency of the switching pulses by having its output connected to the input of the PWM comparator. Oscillators used in switching regulators may have typical frequencies between 40kHz and 1MHz and those frequencies may determine the efficiency of the regulator. In the case of S-8354A40MC-JQZT2G, the oscillator provides a wide range of adjustable frequencies between 200kHz and 1MHz and can even reach up to 1.5MHz.

The error amplifier within the S-8354A40MC-JQZT2G is a key component since it helps to maintain the output voltage of the regulator constant. It has two inputs - one connected to the output voltage and the other to the feedback voltage. When both voltages are the same, the amplifier is then in balance with no current flow in the output of the amplifier. When any change occurs in the output voltage, resulting in either, an increase or a decrease, the amplifier will then be unbalanced and its output to the pulse width modulator will cause it to either increase or decrease the width of the pulses sent to the power switch.

The voltage reference is adjustable and sets the output voltage of the regulator. It is the basic element in the PWM adjustment of the output voltage. The reference voltage is compared to the feedback voltage, which is the output voltage of the regulator. When the two are equal, the PWM-signal is 0%. When the output voltage is higher than the reference, the PWM-signal will be increased in order to decrease the output voltage.

The switch of the S-8354A40MC-JQZT2G is an N-channel MOSFET switch that is highly efficient and provides high quality, low noise power conversion. The switch is used to control the flow of current between the input voltage and the output voltage. In the S-8354A40MC-JQZT2G IC, the switch is controlled and activated by the PWM outputs of the controller IC.

Finally, the operational transconductance amplifier (OTA) of the S-8354A40MC-JQZT2G functions as a control block within the IC. It is connected to the outputs of the error amplifier. The OTA then amplifies the difference between the two output voltages, making it possible for the controller IC to output the correct pulse width for regulating the power switch. The OTA of the S-8354A40MC-JQZT2G thus helps to ensure that the output voltage is stable and accurate.

In conclusion, the S-8354A40MC-JQZT2G from Rohm was designed to offer a low cost, high performance solution for buck switching voltage regulators with a maximum output current of 1A. It is characterized by high performance, low jitter, low noise, and low standby current, and has a wide operating voltage range of 4V to 40V. The IC utilizes an oscillator, an error amplifier, a voltage reference, a power switch and an operational transconductance amplifier (OTA) to ensure efficient power conversion, which makes it an ideal choice for industrial systems, battery-powered equipment and mobile systems.

The specific data is subject to PDF, and the above content is for reference