S0603-10NH1D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are one of the most common types of inductors used in electronic circuits. As its name implies, a fixed inductor is a type of inductor whose inductance remains constant over a specified frequency range. The S0603-10NH1D is a type of fixed inductor that is usually used in the frequency range of 0-1 GHz.

The S0603-10NH1D is designed in a compact package with a height of 1.6 mm and a diameter of 6 mm. It is made from a powdered ferrite core and is covered with a printed circuit board (PCB). The inductance of the S0603-10NH1D is 10 nH and its tolerance is ±20%. The resistance of the S0603-10NH1D is 20 milliohms maximum and its self-resonance frequency is 1.5 GHz.

The S0603-10NH1D is typically used in electronic circuits to filter and stabilize signal transfer. It can be used to create low-pass or high-pass filter circuits that can reduce noise and eliminate interference. It can also be used to reduce power ripple in power supplies. Additionally, the S0603-10NH1D can be used in time-constant circuits to create a delay between two signals.

The S0603-10NH1D works in a similar way to other types of fixed inductors. It has two terminals, one connected to a current source and the other connected to ground. When a current is applied to the inductor, a magnetic field is created which induces a self-induced voltage in the inductor. This voltage is opposite in polarity to the current and is proportional to the rate of change of the current. This principle is known as Faraday’s Law and is the basis for the working of all inductors.

The S0603-10NH1D also has a high Q factor, which is a measure of the inductor’s ability to store energy. It has a Q factor of up to 400, which means that it can store up to four times more energy than a conventional inductor.

The S0603-10NH1D is a versatile fixed inductor that can be used in a wide variety of applications. It can be used in both digital and analog circuits, and its high Q factor makes it suitable for use in high-frequency circuits. It is typically used in frequency filters, power supplies, oscillators, communication systems, and other electronic circuits.

The specific data is subject to PDF, and the above content is for reference