S0603-10NH3D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electrical components designed for the task of storing electrical energy in the form of magnetic flux. They are commonly used in AC/DC electronics and come in a range of shapes and sizes, depending on the application–from tiny SMD inductors to larger components that require high volt-amp ratings and even higher inductance. The S0603-10NH3D is one such inductor capable of making a big impact in a variety of power delivery systems.

An S0603-10NH3D is a surface-mount chip-type inductor with a 10-nanometer tolerance and a 3-dot mark. This inductor is built with an incorporated non-magnetic core made from an alloy of ferrite and nickel. These cores provide high levels of magnetic permeability and low losses for use in areas of high inductance and tolerance.

In terms of application fields, the S0603-10NH3D is suitable for use in power conversion and distributed power applications including DC-DC power supplies, on-board DC-DC power converters, and power over Ethernet systems. This inductor is also suitable for use in switching power supplies, power-factor correction circuits, and radio-frequency (RF) applications.

The two key components to the functioning of the S0603-10NH3D are its inductance, measured in Henrys, and its saturation current, measured in amperes. A typical inductor behaves as an AC resistor, with the inductance reducing as the frequency rises. This inductance is dependent on the core material, core geometry, and the number of windings on its coils. The saturation current or DC bias, on the other hand, is the current at which the magnetic field resulting from the current induces an electric field at the core, in turn leading to further increase in the inductance (hence saturation). The materials used and the winding configuration contributes to the saturation current rating of the inductor.

The S0603-10NH3D inductor offers excellent characteristics for use in fairly demanding circuits. Its 3-dot marking indicates a toroidal core type, which provides the inductor with a high degree of linear inductance stability over a range of frequencies, and a lower saturation current than other types of inductors. This makes it suitable for use in applications requiring precise inductance, such as power factor correction of AC/DC applications, as well as radio-frequency circuits.

In short, the S0603-10NH3D inductor is a type of surface-mount chip-type inductor that is designed for high inductance and stability applications, such as power conversion and distributed power supply systems. It is characterized by its magnetic core non-magnetic alloy design, 10 nanometer tolerance, 3-dot mark, and high saturation current rating, all of which combined make it a great choice for a wide range of practical applications.

The specific data is subject to PDF, and the above content is for reference