Allicdata Part #: | 399-10605-ND |
Manufacturer Part#: |
SC-02-101 |
Price: | $ 1.15 |
Product Category: | Filters |
Manufacturer: | KEMET |
Short Description: | COMMON MODE CHOKE 1MH 2A 2LN TH |
More Detail: | 1mH @ 100kHz 2 Line Common Mode Choke Through Hole... |
DataSheet: | SC-02-101 Datasheet/PDF |
Quantity: | 48 |
1 +: | $ 1.03950 |
10 +: | $ 1.01871 |
25 +: | $ 0.68191 |
50 +: | $ 0.60707 |
100 +: | $ 0.55616 |
250 +: | $ 0.49896 |
500 +: | $ 0.48857 |
1000 +: | $ 0.35343 |
5000 +: | $ 0.31185 |
Voltage Rating - AC: | 250V |
Package / Case: | Vertical, No Base, 4 PC Pin |
Height (Max): | 0.906" (23.00mm) |
Size / Dimension: | 0.906" Dia x 0.512" W (23.00mm x 13.00mm) |
Mounting Type: | Through Hole |
Features: | -- |
Approvals: | -- |
Ratings: | -- |
Operating Temperature: | -25°C ~ 105°C |
Series: | SC |
Voltage Rating - DC: | 250V |
DC Resistance (DCR) (Max): | 110 mOhm |
Current Rating (Max): | 2A |
Inductance @ Frequency: | 1mH @ 100kHz |
Number of Lines: | 2 |
Filter Type: | Power Line |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Common Mode Chokes are electrical components used for filtering out high frequency noise in power supplies and other circuits. The SC-02-101 is a particular type of Common Mode Choke used in a wide variety of applications. In this article we will discuss the application field and working principle of the SC-02-101.
The SC-02-101 is a ChoiceOfType II shielded Common Mode Choke that is suitable for use in applications with high frequency noise. It is designed for frequencies up to 300 MHz, though it can also be used in higher frequency avenues if needed. The SC-02-101 is a low cost, low-profile solution to high frequency noise reduction. The SC-02-101 is typically used in circuit boards, computer motherboards, TV/Audio systems and various telecommunications systems.
The working principle of the SC-02-101 is to reduce noise induced by electromagnetic interference by creating an electromagnetic shield. This is done by using the magnetism of the magnetic core and the conductivity of the copper wire surrounding the core. The core is made of ferrite or iron powder, while the copper wire is wrapped around the core in either a multi-tape or air-core design. This creates an inductive reactance that restricts the flow of high frequency signals, while allowing low frequency signals to pass through. This effectively reduces the amount of noise that is present in the circuit, allowing it to perform at its best.
The SC-02-101 is a great choice of Common Mode Choke due to its high frequency capabilities and low cost. It is a widely used solution for filtering high frequency noise in a variety of applications, and is an ideal fit for high frequency power supplies and other circuits. It is a reliable, low profile solution that is sure to meet your noise filtering needs.
The specific data is subject to PDF, and the above content is for reference
CMC 100MH 400MA 2LN TH100mH @ 10kHz 2 Li...
COMMON MODE CHOKE 27MH 1A 2LN TH27mH @ 1...
CMC 3.3MH 1.2A 2LN TH3.3mH @ 10kHz 2 Lin...
COMMON MODE CHOKE 13MH 2A 2LN TH13mH @ 1...
COMMON MODE CHOKE 1.3A 2LN TH2 Line Comm...
COMMON MODE CHOKE 1MH 20A 2LN TH1mH @ 10...