Allicdata Part #: | 399-10656-ND |
Manufacturer Part#: |
SC-10-20J |
Price: | $ 2.60 |
Product Category: | Filters |
Manufacturer: | KEMET |
Short Description: | COMMON MODE CHOKE 2MH 10A 2LN TH |
More Detail: | 2mH @ 100kHz 2 Line Common Mode Choke Through Hole... |
DataSheet: | SC-10-20J Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 2.36250 |
10 +: | $ 1.91583 |
25 +: | $ 1.54904 |
50 +: | $ 1.45114 |
100 +: | $ 1.38587 |
250 +: | $ 1.34513 |
500 +: | $ 1.30435 |
1000 +: | $ 1.26359 |
5000 +: | $ 1.16169 |
Voltage Rating - AC: | 250V |
Package / Case: | Vertical, 4 PC Pin |
Height (Max): | 1.732" (44.00mm) |
Size / Dimension: | 1.654" L x 1.142" W (42.00mm x 29.00mm) |
Mounting Type: | Through Hole |
Features: | -- |
Approvals: | -- |
Ratings: | -- |
Operating Temperature: | -25°C ~ 105°C |
Series: | SC |
Voltage Rating - DC: | 250V |
DC Resistance (DCR) (Max): | 22 mOhm |
Current Rating (Max): | 10A |
Inductance @ Frequency: | 2mH @ 100kHz |
Number of Lines: | 2 |
Filter Type: | Power Line |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Common Mode Chokes
Common mode chokes are popular for their wide application field and working principle. The SC-10-20J is one of the most commonly used types of common mode choke. It can be used in many different types of low voltage DC applications.
The SC-10-20J is a three-terminal device that consists of an outer winding and an inner winding. The outer winding has a series of interconnected conductors, while the inner winding has a single conductor that is connected to one of the terminals. The two windings are connected by a center tap. The center tap is connected to the other two terminals.
The SC-10-20J works by providing a low frequency AC signal which passes through the windings and is then diverted to ground. This AC signal acts as a filter, blocking the higher frequency noise from being transmitted across the device. The choke also provides an impedance to the noise signal, such that it cannot pass through.
The SC-10-20J is most commonly used in low voltage DC applications, such as automobile electronics and solar cells. It is also used in applications where a low level of EMI (electromagnetic interference) needs to be blocked from entering the system. In some applications, the SC-10-20J may also be used to limit the voltage on sensitive components, such as LEDs.
Some of the advantages of using the SC-10-20J include its high efficiency, low frequency operation, low cost, and low level of EMI leakage. However, it is important to note that the device should not be used for applications where higher frequencies need to be blocked, as it is not designed for such purposes.
In conclusion, the SC-10-20J is a common type of common mode choke that is used in many different types of DC applications. It works by providing a low frequency AC signal which passes through the windings and is then diverted to ground. The choke also provides an impedance to the noise signal, such that it cannot pass through. It is important to note that the device should not be used for applications where higher frequencies need to be blocked, as it is not designed for such purposes.
The specific data is subject to PDF, and the above content is for reference
CMC 100MH 400MA 2LN TH100mH @ 10kHz 2 Li...
COMMON MODE CHOKE 27MH 1A 2LN TH27mH @ 1...
CMC 3.3MH 1.2A 2LN TH3.3mH @ 10kHz 2 Lin...
COMMON MODE CHOKE 13MH 2A 2LN TH13mH @ 1...
COMMON MODE CHOKE 1.3A 2LN TH2 Line Comm...
COMMON MODE CHOKE 1MH 20A 2LN TH1mH @ 10...