Allicdata Part #: | 399-10657-ND |
Manufacturer Part#: |
SC-10-30J |
Price: | $ 1.95 |
Product Category: | Filters |
Manufacturer: | KEMET |
Short Description: | COMMON MODE CHOKE 3MH 10A 2LN TH |
More Detail: | 3mH @ 100kHz 2 Line Common Mode Choke Through Hole... |
DataSheet: | SC-10-30J Datasheet/PDF |
Quantity: | 699 |
1 +: | $ 1.77660 |
10 +: | $ 1.42002 |
25 +: | $ 1.15366 |
50 +: | $ 1.12405 |
100 +: | $ 1.09444 |
250 +: | $ 1.06483 |
500 +: | $ 1.05596 |
1000 +: | $ 0.93468 |
5000 +: | $ 0.85777 |
Voltage Rating - AC: | 250V |
Package / Case: | Vertical, 4 PC Pin |
Height (Max): | 1.299" (33.00mm) |
Size / Dimension: | 1.339" L x 0.945" W (34.00mm x 24.00mm) |
Mounting Type: | Through Hole |
Features: | -- |
Approvals: | -- |
Ratings: | -- |
Operating Temperature: | -25°C ~ 120°C |
Series: | SC |
Voltage Rating - DC: | 250V |
DC Resistance (DCR) (Max): | 30 mOhm |
Current Rating (Max): | 10A |
Inductance @ Frequency: | 3mH @ 100kHz |
Number of Lines: | 2 |
Filter Type: | Power Line |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Common Mode Chokes
Common mode chokes are an important type of electronic component. They are used to reduce the level of conducted and stray electromagnetic interference (EMI) from circuits or systems to limit the effects of the interference on other parts in the system. They are typically used to minimize common mode noise, which is the noise that exists in both the signal and power lines of a circuit or system.
The SC-10-30J is one example of a common mode choke. It is designed to provide full suppression of the common-mode noise, which generally consists of magnetic fields, from entering or leaving a circuit. The SC-10-30J utilizes two or more windings, connected to each other in a very special way to reject high frequency noise conducted on the power lines.
The SC-10-30J works in two ways. The first is that the choke absorbs the noise created by high frequency signals and thus reduces it from passing into the circuit. The second way the choke works is to provide a low impedance barrier between two circuits to reduce the coupling of noise from one circuit to another.
The SC-10-30J is an ideal choice for a variety of applications where common mode noise reduction is necessary. It is designed to filter out noise from .1 to 30MHz, and has a rated impedance of 1.8mH. This makes it suitable for a wide range of applications, including power line conditioning, industrial drive systems, motor control, and drive systems for appliances. Additionally, it can be used for industrial automation, instrumentation, servers, and more.
The SC-10-30J is a very efficient EMI filtering solution for most on-board control systems. Its high impedance features ensure that most EMI noise is effectively absorbed and filtered, providing more reliable and consistent operation. In addition, its wide range of frequency response makes it well-suited for a variety of applications.
The main purpose of the SC-10-30J common mode choke is to reduce the amount of electromagnetic interference (EMI) that is conducted or leaked from one circuit to another. It is designed to absorb and suppress noise within a frequency range, making it suitable for a wide range of applications where EMI reduction is essential. Its wide range of frequency response and high impedance features make it an ideal choice for most noise suppression applications.
The specific data is subject to PDF, and the above content is for reference
CMC 100MH 400MA 2LN TH100mH @ 10kHz 2 Li...
COMMON MODE CHOKE 27MH 1A 2LN TH27mH @ 1...
CMC 3.3MH 1.2A 2LN TH3.3mH @ 10kHz 2 Lin...
COMMON MODE CHOKE 13MH 2A 2LN TH13mH @ 1...
COMMON MODE CHOKE 1.3A 2LN TH2 Line Comm...
COMMON MODE CHOKE 1MH 20A 2LN TH1mH @ 10...