SDR0603-221KL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors are electronic components used to store energy in a magnetic field, also known as inductance. Inductance usually consists of a coil of wire with several turns that create an electromagnetic field when an electrical current flows through it. This electromagnetic field provides an opposition to changes in the current, creating a back EMF, that feeds the current back.

SDR0603-221KL is one type of fixed inductors, which is derived from wire-wound type. It is constructed using a wire element winding around a ferrite core. The core presents a low resistance path and helps to ensure that the high-currents generated by the inductor windings do not create heat.

The primary application of the SDR0603-221KL is as an inductance module in power-conversion systems, where the inductor’s high efficiency and low resistance help to maximize the power transfer efficiency of the system. It can also be used for radio-frequency signal switching and attenuation, and in circuit filters. With the size of SDR0603-221KL comes in at 5.7 x 3.0 x 2.2 mm with a current carrying capability of up to 6 Amps, it is ideal for applications with space restrictions.

To understand the working principle of SDR0603-221KL, it’s important to understand the properties of electromagnetic induction. When an electrical current passes through a wire, it generates an electromagnetic field. This field induces a voltage in a nearby coil, which is proportional to both the area of the coil and the rate of change in the current. By using a ferrite core, the magnetic field is effectively increased by concentrating the magnetic flux, thus increasing the induced voltage that is generated.

When the SDR0603-221KL is connected across a power source, the induced voltage in the coil prevents current through the inductor from increasing too quickly, allowing for a smooth controlled rise in current through the inductor. This prevents spikes and drops in voltage due to changes in current, allowing the inductor to provide a constant, regulated electric current. The inductor also works in the reverse direction, providing the same controlled decrease in current when the voltage across the inductor is reduced.

SDR0603-221KL also provide input and output filtering in power circuits. By connecting the inductor in series with the circuit, any spikes in voltage will be reduced in passing through the inductor before entering the circuit, thus providing an input filter. Similarly, when the inductor is connected across the circuit, any sudden changes in current can be buffered, as the inductor will absorb the fluctuation, acting as an output filter.

In conclusion, the SDR0603-221KL is an extremely versatile and effective device, capable of providing both input and output filtering for power systems, as well as providing accurate, controlled current to enable switch-mode power conversion.

The specific data is subject to PDF, and the above content is for reference