SDS60UT09

Power (Watts):	60W
Approvals:	--
Minimum Load Required:	Yes
Size / Dimension:	5.00" L x 3.00" W x 1.20" H (127.0mm x 76.2mm x 30.5mm)
Mounting Type:	Chassis Mount
Features:	Adjustable Output, DC Input Capable, Universal Input
Operating Temperature:	0°C ~ 70°C (With Derating)
Efficiency:	80%
Voltage - Isolation:	3kV
Applications:	ITE (Commercial)
Series:	SDS
Current - Output (Max):	6A, 2A, 800mA
Voltage - Output 4:	--
Voltage - Output 3:	-12V
Voltage - Output 2:	24V
Voltage - Output 1:	5V
Voltage - Input:	90 ~ 264 VAC
Number of Outputs:	3
Type:	Open Frame
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SDS60UT09 is an AC-DC power converter designed primarily for use in mains-powered equipment such as mobile phones, computers, and other devices. It is an efficient, low-cost solution for powering small loads from the wall socket.The SDS60UT09 is a high-efficiency converter, providing up to 96% efficiency at full load. It is a two-stage AC-DC converter design, consisting of a Fully-Control Bridge Rectifier at the front, followed by a flyback transformer. The Bridger Rectifier converts AC to DC efficiently, and the flyback transformer provides galvanic isolation and voltage transformation.The SDS60UT09 uses a low-profile design, consisting of two boards – one for the primary control and the other for the secondary control. The primary board is used to rectify the incoming AC, and is fitted with an EMI filter and surge protection circuitry to protect against high-voltage spikes. On the secondary board is a switching power supply, programmed to switch the DC current from the rectifier into the correct output voltage. The output voltage is adjustable from 3.3V to 5V, and the output power can be adjusted from 1A to 30A.On the primary board is a controller IC, which is used to manage the control signals. The control signals are used to control the switching frequency and duty cycle of the converter, as well as the output voltage. The controller IC works in conjunction with the EMI filter, to reduce the amount of RF interference from the converter.The SDS60UT09 also has various safety features built-in, such as over-load protection, over-voltage protection, and short-circuit protection. The safety features ensure that the converter and your equipment are always protected from power surges and other potential problems.In conclusion, the SDS60UT09 is an efficient, low-cost AC-DC converter suitable for mains-powered equipment such as mobile phones, computers, and other devices. It provides up to 96% efficiency at full load, and is fitted with an EMI filter for RF interference reduction. It also has built-in over-load, over-voltage and short-circuit protection features, which ensure the safety of your equipment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description