SEAM-40-02.0-SM-08-2-A-K-TR

The SEAM-40-02.0-SM-08-2-A-K-TR is an Edge Type, Mezzanine (Board to Board) rectangular connector that is designed to provide a reliable electrical connection between two printed circuit boards. It is used in a variety of applications where board to board connection is required and it also has an operating temperature range of -65 to +150℃.

The SEAM-40-02.0-SM-08-2-A-K-TR is a mezzanine connector which features a unique design, allowing for high-density interconnection in a variety of applications. It has a maximum current rating of 3 A and a voltage rating of 150V AC per contact. The connector has 40 terminal positions with a pin pitch of 2.0 mm and a contact pin diameter of 0.8 mm. It also has two kinds of terminals which include straight and angled terminals. The terminal wires can both be crimped or soldered.

The SEAM-40-02.0-SM-08-2-A-K-TR’s primary application is interconnecting two printed circuit boards. The mezzanine design allows for a strong connection between the two boards, which optimises electrical performance while reducing or eliminating wear and tear of the contact surface. The connector has good resistance to vibration and shock, making it suitable for rugged applications. It is also RoHS-compliant and IP67-rated, providing protection against dust and water.

The working principle of the SEAM-40-02.0-SM-08-2-A-K-TR is fairly simple. Once the connector is inserted into the mating board, the pins on the connector and board make contact. The electrical connection between the two boards is then established and the power is delivered to the necessary components. The contact between the connector and board is maintained through the connector’s locking system, which ensures a strong connection.

In conclusion, the SEAM-40-02.0-SM-08-2-A-K-TR is a high-density Edge Type, Mezzanine (Board to Board) rectangular connector that is designed for board-to-board connection. It has a maximum current rating of 3 A and a voltage rating of 150V AC per contact. Its primary application is interconnecting two printed circuit boards and the working principle is fairly simple. The connector is also RoHS-compliant and IP67-rated, providing protection against dust and water.