SFBCL2000153MX1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Feed through capacitors such as the SFBCL2000153MX1 are used for various applications, including filtering high frequency signals, high frequency radio transmissions, and supporting voltage regulation in electronic devices. They are also used to reduce noise on electrical lines, minimize signal reflection when connecting two lines, and block high frequency signals in an array of short-range communication applications.

SFBCL2000153MX1 feed through capacitors essentially consist of two capacitors in parallel. This allows the capacitor to have a low series inductance, which in turn means that a higher capacitance can be achieved in the same physical space, compared to a single capacitor. This higher capacitance is helpful in blocking out high frequency signals that might otherwise interfere with the desired connection. The two capacitors are also connected using two separate pieces of wire, which creates an "air gap" between the two capacitors which helps block stray high frequency signals from the circuit.

The two capacitors in the SFBCL2000153MX1 feed through capacitors are each connected to a separate part of the same circuit board, usually one side of the board to the other. This allows the capacitance to be increased or decreased by simply changing the connections to the board. The feed through capacitors are also designed to filter high frequency noise from the circuit, as well as helping maintain a stable voltage in the circuit.

In addition to its use as a filter, the SFBCL2000153MX1 feed through capacitors can also be used to provide a low impedance path between two lines, and to adjust the time delay of a signal. By adjusting the capacitance of the feed through capacitor, the amount of current supplied to the line can be varied, and the time delay of the signal can be decreased. This is useful in applications such as digital communication systems where the delay of the signal needs to be adjusted in order to avoid data corruption.

The SFBCL2000153MX1 feed through capacitors are also used to shield sensitive components from high frequency radio transmitters. By placing the capacitors between the transmitter and the component, the radio waves will be blocked and the component will be protected from potential damage.

The working principle of the SFBCL2000153MX1 feed through capacitors is relatively simple. The two capacitors are each connected to the same circuit board, and the capacitance can be adjusted by simply changing the connections to the board. The feed through capacitors are designed to filter out high frequency noise and provide a low impedance path between two lines. Additionally, they can be used to shield sensitive components from high frequency radio transmitters, and to adjust the time delay of signals.

The specific data is subject to PDF, and the above content is for reference