SFBCL5000152MX0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Feed Through Capacitors

SFBCL5000152MX0 is a feed-through capacitor, a device mainly used in coupling applications in electrical systems. It has the major advantage of being able to pass/transfer the current waveform of a signal in a circuit directly, without any interruption or additional processing. Feed-through capacitors also act as a filter, allowing high-frequency signals to pass freely while absorbing and filtering low-frequency signals.

This device consists of a metal shield with a ceramic core that is wrapped in multiple metal electrodes which are then connected to the signal circuit. The ceramic core is designed to be non-conductive, allowing the current waveform to pass through it. The metal electrodes are connected to the signal circuit and act as the filter. They act as a capacitor, absorbing and filtering low-frequency signals, while high-frequency signals are able to pass through freely.

The signal circuit may be used to transmit high-frequency signals such as radio waves, audio signals, and video signals in a wide variety of electrical systems. This device can be used in a wide variety of applications, including broadcast and telecommunications, professional audio and video systems, and automotive electronics. It can also be used in consumer electronics such as televisions, DVD players, and videogame consoles.

When using this device in any application, it is important to keep in mind that it needs to be properly matched to the system in order to achieve the desired performance. As a general rule, the closer the feed-through capacitor is to the signal source, the better the performance will be. Furthermore, the device should be able to handle the amount of power transmitted, and its location should be carefully chosen to make sure it does not introduce any unwanted noise into the audio or video signal.

Feed-through capacitors are widely used in a variety of applications and are often the preferred choice when it comes to filtering high-frequency signals in electrical systems. Although they are not the only choice, they are the most common due to their ability to block low-frequency signals, while allowing high-frequency signals to pass through with minimal attenuation.

The specific data is subject to PDF, and the above content is for reference