SFBDP5000301MC1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Feed Through Capacitors

Feed through capacitors are a type of capacitor which pass an electrical signal through its body. This is done to filter out or bypass any unwanted frequencies in an electronic circuit. It is often used in audio applications and radio communications. This type of capacitor has two leads which are connected in the same direction. The leads are insulated from each other to prevent any short circuits. The most common types of feed through capacitors are ceramic capacitors and mica capacitors.

The SFBDP5000301MC1 feed through capacitor is an axial leaded plastic encapsulated capacitor with a maximum operating voltage of 450 volts. This type of capacitor is suitable for filtering out unwanted interference in RF and audio applications such as interference from DC power supplies, EMI, ESD and signal bleed through. It is also used to provide impedance matching between circuits.

SFBDP5000301MC1 Application Field

The SFBDP5000301MC1 feed through capacitor is commonly used in consumer electronic products including radios, amplifiers, electronic musical instruments and audio systems. It is also used to filter out low-frequency and high-frequency signals in medical applications. In some applications, it is also used to reduce EMI and noise from DC power supplies. The SFBDP5000301MC1 is also suitable for use in high-temperature environments up to 125°C and can also be used in high-humidity applications.

SFBDP5000301MC1 Working Principle

The feeding capacitor works on the principle of electrical filtering. It is used to pass only certain frequencies and reject other frequencies. The SFBDP5000301MC1 feed through capacitor works by providing a low resistance path to frequencies and electrostatic fields in a circuit. The capacitor is made of a ceramic or mica dielectric, which is very resistant to heat and other possible damage. This allows the capacitor to filter out unwanted frequencies and provide a clean, low-distortion signal path.

The SFBDP5000301MC1 is a through-hole device which allows for easy assembly and offers high reliability. It has a minimum insulation resistance of 5000 megohms, making it suitable for high-impedance applications. The capacitor has a maximum capacitance of 301pF at 500Hz with an inductive reactance of 10 ohms or less. This means that it is also suitable for use in high-Q applications. The SFBDP5000301MC1 feed through capacitor also has a high current rating of 1A and a dielectric strength of 400 volts.

Conclusion

In conclusion, the SFBDP5000301MC1 is a highly reliable feed through capacitor with a variety of applications. It is suitable for use in audio, RF and medical applications, and can also be used to reduce interference from DC power supplies. It has a high current rating and a dielectric strength of 400 volts, making it suitable for use in high-impedance applications. The SFBDP5000301MC1 feedthrough capacitor is an essential component in any application where signal integrity and filtering are important.

The specific data is subject to PDF, and the above content is for reference