SFCDP500136PMC1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Feed Through Capacitors

Feed through capacitors are components that are used to couple interference signals across a break or break in the ground connection. A feed through capacitor is a two-terminal type of capacitor, which is used to provide a high-voltage insulation for a signal between the two terminals.

The SFCDP500136PMC1 is an application field and working principle of the feed through capacitors. It is a high-voltage feed-through capacitor with a high operating voltage of 500 V DC and a power rating of 1.2 W. This capacitor has a dielectric strength of 16 kV ind and is mainly used in the applications such as high-frequency switching power supplies, high-frequency communication circuits, signal processor, and control systems.

The feed through capacitor works on the principle of capacitive reactance. The two insulated conductors of the SFCDP500136PMC1 are connected across a junction and create an alternating electric field. The electric field induces a displacement current across the junction, which is proportional to the rate of change of the electric field. The induced displacement current then reacts with the capacitance of the two insulated conductors to create an electrical force, which reduces the current passing through the junction.

The capacitance of the SFCDP500136PMC1 is made up of two distinct values, the series capacitance and the shunt capacitance. The series capacitance is a high-frequency response capacitor and is used to filter out the higher frequency signals, providing good high-frequency isolation between the conductors. The shunt capacitance is designed to filter out the lower frequency signals, providing better low frequency isolation.

The SFCDP500136PMC1 has a wide range of applications in areas such as high-frequency switching power supplies, signal processors, high-frequency communication circuits, and control systems. It is also used to isolate high-frequency pulse signals from the main power lines, thus eliminating harmonic distortion. It can also be used as an end-of-line resistor to reduce signal noise.

The SFCDP500136PMC1 is a reliable, high performance component that is used to provide good high and low-frequency isolation, as well as high voltage insulation. It has excellent temperature stability and is ideal for applications requiring high operating voltages. Its superior design and construction make it an ideal choice for applications that require reliable, high-performance insulation.

The specific data is subject to PDF, and the above content is for reference