SFR2500008204JA500

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are one of the most commonly used components in a variety of electrical and electronic circuits. The SFR2500008204JA500 is a through hole resistor with a resistance value of 25 Ohms and a tolerance of 0.025%. It comes in an axial package, meaning that its leads protrude in two opposite directions from its body for easy mounting.

The SFR2500008204JA500 is typically used in high power, low frequency circuits, as its composition is well-suited to dissipating large amounts of energy with relatively low risk of failure. This makes it particularly suitable for applications such as power and audio amplifiers, where high power dissipation is needed. It can also be used as a series or shunt resistor in circuits, and as a voltage divider to regulate or alter the voltage of a current.

The SFR2500008204JA500 is constructed of a ceramic body and two wires connected to the ends of the body to form an electrical circuit. The wires are made from a conductive metal, such as copper, and are insulated from the ceramic body. The ceramic body acts as a dielectric which insulates the two wires and prevents electrical current from flowing between them. The resistor works by dissipating the electrical energy of the current as heat.

The resistive value of the SFR2500008204JA500 is determined by the length and diameter of the metal wires used to form the electrical circuit. The longer the wires and the larger their diameter, the greater the resistance value. The tolerance value is determined by the quality of the ceramic used to form the body and the quality of the wires used, as well as other factors such as environmental conditions.

In conclusion, the SFR2500008204JA500 is a through hole resistor with a resistance value of 25 Ohms and a tolerance of 0.025%. It is typically used in high power, low frequency circuits, and can be used for applications such as power and audio amplifiers or as a series or shunt resistor. Its resistance value is determined by the length and diameter of the metal wires used to form the electrical circuit, and its tolerance is determined by the quality of the ceramic used to form the body and the quality of the wires used.

The specific data is subject to PDF, and the above content is for reference